[Asterisk-Users] TE11OP -> Mitel 200Sx??

Scott Wolfe scottwolfe at orbus.net
Sat Apr 23 19:00:13 MST 2005 

The Switch is since 1995 and I get a SX-200 Digital G1005 ENH 672P / F25.0 
09-FEB1994 when I look up the software on the switch board so if I am 
reading what your telling me then I have to do D4/AMI. So does my zaptel 
look correct? Maybe my cableing is off.
Thanks,
  -Scott
----- Original Message ----- 
From: "Henry Devito" <hdevito at mchsi.com>
To: <dwalker at jackson-tube.com>; "Asterisk Users Mailing List - 
Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Friday, April 22, 2005 8:34 PM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??


> Of course there are exceptions to the rules.  I see now on a couple 
> software releases where they do allow PRI with D4/AMI and PRI with 
> esf/b8zs.  It's been a year or so since I messed with trunking on a 200, 
> I've mostly been installing and maintaining the SX2000's and 3300's.
>
> Henry
>
>
>
> ----- Original Message ----- 
> From: "Dennis Walker" <dwalker at jackson-tube.com>
> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
> <asterisk-users at lists.digium.com>
> Sent: Friday, April 22, 2005 9:13 PM
> Subject: RE: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>
>
>>I have done the same thing with an sx200 and a pri circuit
>>
>> My sx200 can only do ami d4 and e&m channels
>>
>> Here's parts of my config that takes the pri and converts it to e&m with
>> ANI & DNIS
>>
>> zaptel.conf
>>
>> # t1 connected to the PRI circuit
>> span=1,1,0,exf,b8zs
>>
>> # t1 connected to SX200
>> # the t1 card on my sx200 did d4 ami and I supplied ANI and DNIS through
>> the dial plan
>>
>> span=2,0,0,d4,ami
>>
>> bchan=1-23
>> dchan=24
>> e&m=25-47
>> ---------------------------------------------
>> zapata.conf
>>
>> [channels]
>>
>> echocancel=yes
>> echocancelwhenbridged=yes
>> echotraining=no
>> rxgain=0.0
>> txgain=0.0
>> useincomingcalleridonzaptransfer=yes
>> restrictcid=no
>> context=default
>> usecallingpres=yes
>> usercallerid=yes
>> hidecallerid=no
>> callerid="Company Name"<8005551212>
>> signalling=pri_cpe
>> switchtype=dms100
>> group=1
>> channel => 1-23
>>
>> group=2
>> signalling=em_w
>> emdigitwait=500
>> channel => 24-47
>>
>> # I needed the emdigitwait=500 to wait long enough for the SX200 to dial
>> out it's digits
>>
>>
>> --------------------------------------------------
>> extensions.conf
>>
>> # our PRI circiut gave us the last 4 digits of the dialed number and this
>> is how I passed
>> #   *ANI*DNIS*  to the SX200 for it to decode
>>
>> # the first group were individual numbers that mapped to faxes and modems
>>
>> exten => 1234,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>> exten => 5555,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>> exten => 3333,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>
>> # this set mapped our did 5000 - 5199 to the SX200
>>
>> exten => _5[0-1]XX,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>
>> The reset of the dial plan took what ever I set up in the sx200 ARS to 
>> dial
>> out and
>> sent out put Zap/G1
>>
>>
>> Hope this helps
>>
>>
>>
>>
>> ----------
>> From: Henry Devito[SMTP:hdevito at mchsi.com]
>> Reply To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Sent: Friday, April 22, 2005 8:56 PM
>> To: Scott Wolfe; Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>
>> <<File: ATT00262.html>><<File: ATT00263.txt>>
>> I was wrong.  I just looked in my Mitel I&M's.  What level software are 
>> you
>> on in the SX200?  Up until a certain level 200's could only do D4/AMI 
>> T1's,
>> they could not do PRI's.  If it is a newer switch within the past 3 years
>> or an older switch with later software than you can do PRI, but the
>> signaling and framing must be ESF/B8ZS.
>>
>> Henry
>>  ----- Original Message -----
>>  From: Scott Wolfe
>>  To: mike at shelcomm.com ; Asterisk Users Mailing List - Non-Commercial
>> Discussion
>>  Sent: Friday, April 22, 2005 7:04 PM
>>  Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>
>>
>>
>>
>>  Thanks,
>>    This is what I have now, but my Mitel PBX and Asterisk Box are unable
>> to communicate via the T1 connection. Asterisk loads ok but I get error
>> lights (blinking orange) on my TE110P and on my Mitel T1 card. Hummmm
>>
>>
>>  -Scott
>>
>>  /etc/zaptel.conf
>>  loadzone = us
>>  defaultzone=us
>>  span=1,0,0,d4,ami
>>  bchan=1-23
>>  dchan=24
>>
>>  /etc/asterisk/zapata.conf
>>  [trunkgroups]
>>
>>  [channels]
>>  context=default
>>  switchtype=dms100
>>  rxwink=300
>>  usecallerid=no
>>  hidecallerid=no
>>  callwaiting=no
>>  usecallingpres=yes
>>  callwaitingcallerid=no
>>  threewaycalling=yes
>>  transfer=yes
>>  canpark=yes
>>  cancallforward=yes
>>  callreturn=yes
>>  echocancel=yes
>>  echocancelwhenbridged=yes
>>  rxgain=0.0 ;into the pstn twords the telco
>>  txgain=0.0
>>  callgroup=1
>>  pickupgroup=1
>>  immediate=yes
>>
>>  signalling=pri_cpe
>>  group=1
>>  context=default
>>  emdigitwait=500
>>  channel => 1-23 ; Set this to 1-15,17-31 for E1
>>
>>
>>
>>
>>    ----- Original Message -----
>>    From: Michael D Schelin
>>    To: Asterisk Users Mailing List - Non-Commercial Discussion
>>    Sent: Friday, April 22, 2005 4:48 PM
>>    Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>
>>
>>    Hello Henry
>>    e&m=1-23 should be bchan=1-23
>>    you have it set for analog
>>    also
>>    signaling=pri_cpe
>>
>>
>>    Henry Devito wrote:
>>
>>      Don't you need one of these directives so the PRI knows which is
>> master and which is slave?
>>
>>      a.. pri_cpe: PRI signaling, CPE side
>>      a.. pri_net: PRI signaling, Network side
>>
>>      Henry
>>        ----- Original Message -----
>>        From: Scott Wolfe
>>        To: Asterisk-Users at lists.digium.com
>>        Sent: Friday, April 22, 2005 11:01 AM
>>        Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>
>>
>>        Hello all. I just received a TE110P and am trying to hook it to my
>> Mitel 200SX has anyone successfully done this? My configuration is as
>> follows.
>>
>>
>>        Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.
>>
>>
>>        All I get is a blinking yellow on my TE110P card and an alarm on 
>> my
>> Mitel. T1 card.
>>
>>
>>        Any advice would be great.
>>
>>
>>        Zaptel.conf
>>
>>        span=1,0,1,d4,ami
>>
>>        e&m=1-23
>>
>>        dchan=24
>>
>>
>>        Zapata.conf
>>
>>        signalling=em_w
>>
>>        switchtype=dms100
>>
>>        echocancel=yes
>>
>>        echocancelwhenbridged=yes
>>
>>        echotraining=400
>>
>>        callerid=asreceived
>>
>>        group=1
>>
>>        context=default
>>
>>        channel => 1-23
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>        _______________________________________________
>>        Asterisk-Users mailing list
>>        Asterisk-Users at lists.digium.com
>>        http://lists.digium.com/mailman/listinfo/asterisk-users
>>        To UNSUBSCRIBE or update options visit:
>>           http://lists.digium.com/mailman/listinfo/asterisk-users
>> --------------------------------------------------------------------------
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> ------------------------------------------------------------------------
>> ----
>>
>>
>>    _______________________________________________
>>    Asterisk-Users mailing list
>>    Asterisk-Users at lists.digium.com
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>    To UNSUBSCRIBE or update options visit:
>>       http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> ------------------------------------------------------------------------
>> ------
>>
>>
>>  _______________________________________________
>>  Asterisk-Users mailing list
>>  Asterisk-Users at lists.digium.com
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>  To UNSUBSCRIBE or update options visit:
>>     http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list