[Asterisk-Users] TE11OP -> Mitel 200Sx??

[Scott Wolfe]

Thanks,
  This is what I have now, but my Mitel PBX and Asterisk Box are unable to communicate via the T1 connection. Asterisk loads ok but I get error lights (blinking orange) on my TE110P and on my Mitel T1 card. Hummmm


-Scott

/etc/zaptel.conf
loadzone = us
defaultzone=us
span=1,0,0,d4,ami
bchan=1-23
dchan=24

/etc/asterisk/zapata.conf
[trunkgroups]

[channels]
context=default
switchtype=dms100
rxwink=300
usecallerid=no
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=no
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0 ;into the pstn twords the telco
txgain=0.0
callgroup=1
pickupgroup=1
immediate=yes

signalling=pri_cpe
group=1
context=default 
emdigitwait=500
channel => 1-23 ; Set this to 1-15,17-31 for E1




  ----- Original Message ----- 
  From: Michael D Schelin 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Friday, April 22, 2005 4:48 PM
  Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??


  Hello Henry
  e&m=1-23 should be bchan=1-23
  you have it set for analog
  also
  signaling=pri_cpe


  Henry Devito wrote:

    Don't you need one of these directives so the PRI knows which is master and which is slave?

    a.. pri_cpe: PRI signaling, CPE side 
    a.. pri_net: PRI signaling, Network side 

    Henry
      ----- Original Message ----- 
      From: Scott Wolfe 
      To: Asterisk-Users at lists.digium.com 
      Sent: Friday, April 22, 2005 11:01 AM
      Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??


      Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows.



      Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. 



      All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. 



      Any advice would be great. 



      Zaptel.conf

      span=1,0,1,d4,ami

      e&m=1-23 

      dchan=24 



      Zapata.conf 

      signalling=em_w

      switchtype=dms100

      echocancel=yes

      echocancelwhenbridged=yes

      echotraining=400 

      callerid=asreceived

      group=1

      context=default

      channel => 1-23 





--------------------------------------------------------------------------
      _______________________________________________
      Asterisk-Users mailing list
      Asterisk-Users at lists.digium.com
      http://lists.digium.com/mailman/listinfo/asterisk-users
      To UNSUBSCRIBE or update options visit:
         http://lists.digium.com/mailman/listinfo/asterisk-users
----------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050422/f8049625/attachment.htm