[Asterisk-Users] can't make my PRI dial out

[Mark Phillips]

Nothing happens. I get the same (non)error.

I get plenty of output when receiving a call however.

Mark

Andrew Kohlsmith wrote:
> On April 22, 2005 10:41 am, Robert Webb wrote:
> 
>>Your zapata.conf should look like this:
>>
>>language=en
>>context=default
>>switchtype=4ess
>>pridialplan=unknown
>>signalling=pri_cpe
>>echocancel=yes
>>group=1
>>channel=>1-23
>>
>>You need to move the echocancel and the group above the
>>channel line. The channel line definitions must be above
>>and not below.
> 
> 
> You're right, but that's not his problem.  Cause code 0 is no cause code at 
> all; I'd turn on "pri debug span 1" output and see what's coming up there.
> 
> -A.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>