[Asterisk-Users] capi problem with dialout

[Peer Oliver Schmidt]

Paweł Staszewski wrote:
> 
> Hello
>  
> i try with 0 and
>    -- Executing Answer("SIP/478-c9a2", "") in new stack
>     -- Executing Dial("SIP/478-c9a2", "CAPI/7523071:07522333") in new stack
>     -- data = 7523071:07522333
>     -- capi request omsn = 7523071
>   == found capi with omsn = 7523071
>   == CAPI Call CAPI[contr1/7523071]/7     -- Called 7523071:07522333
>     -- CONNECT_CONF ID=001 #0x0b3f LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Info                            = 0x0
>  
>   == received CONNECT_CONF PLCI = 0x101 INFO = 0
>     -- INFO_IND ID=001 #0x1987 LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x8
>   InfoElement                     = <81 81>
>  
>     -- DISCONNECT_IND ID=001 #0x1988 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Reason                          = 0x3481

Before going any further with Asterisk, try to verify your CAPI setup is 
able to dial out. Install something like capi4hylafax, and see if you 
can dialout. If that works come back to asterisk and apply what you have 
learned.

chan_capi works at least as reliable as the bristuff. I am running a AVM 
C4 plus a HFC-S based card in my asterisk server. The CAPI stuff got me 
started, bristuff came later.
-- 
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA