[Asterisk-Users] capi problem with dialout

[Dave Cotton]

On Thu, 2005-04-21 at 12:09 +0200, Paweł Staszewski wrote:
> Hello 
>  
> I have capi 0.3.5 with fritz card and: 
>  
> When i try to dialout i have this message in from "capi debug" : 
>  
> CAPI Debugging Enabled 
> *CLI>     -- Executing Answer("SIP/478-3f3f", "") in new stack 
>     -- Executing Dial("SIP/478-3f3f", "CAPI/@7523071:b7522333") in new
> stack 
>     -- data = @7523071:b7522333 
>     -- capi request omsn = @7523071 
>   == found capi with omsn = 7523071 
>   == CAPI Call CAPI[contr1/7523071]/0 with B3    -- Called
> @7523071:b7522333 
>     -- CONNECT_CONF ID=001 #0x0004 LEN=0014 
>   Controller/PLCI/NCCI            = 0x101 
>   Info                            = 0x0 
>  
>   == received CONNECT_CONF PLCI = 0x101 INFO = 0 
>     -- INFO_IND ID=001 #0x0b97 LEN=0017 
>   Controller/PLCI/NCCI            = 0x101 
>   InfoNumber                      = 0x8 
>   InfoElement                     = <81 81> 
>  
>     -- DISCONNECT_IND ID=001 #0x0b98 LEN=0014 
>   Controller/PLCI/NCCI            = 0x101 
>   Reason                          = 0x3481 
>  
>   == DISCONNECT_IND PLCI=0x101 REASON=0x3481 
>   == No one is available to answer at this time 
>  

How changing from CAPI to a zaphfc card will correct this error I don't
know, and problably neither does the person who suggested it.

REASON 0x3481 is "Unallocated (unassigned) number". = Wrong number.

-- 
Dave Cotton <dcotton at linuxautrement.com>