[Asterisk-Users] Re: IPswitch: How to use speed dialing?

[Ronald Wiplinger]

Has anybody success with speed dialing?
If so, I am sure you can help me to get into this club.




tgj wrote:

>Hi Ronald,
>
>It seems like you need to put in "default" as your context. However I think 
>your problem was that you put the number in CallerID column and The CallerID 
>in the Name column. I was hoping to hear if it helped you to change that?
>
>  
>

Let's try it together:
1. Open IPswitch
2. Open Extensions tab on top
3. Switch to the tab Speed Dials on the bottom
4. Fill in:
          Name:                         901145678901234 at default
          Caller Id:                     Peter
          Visible on Panel:          (ticket)
          Exentension Group:      Speed Dial Numbers


"Congratualtions, you have successfully installed the Asterisk Open
Source ..... "


bye

Ronald



>Thorben
>
>
>"Ronald Wiplinger" <ronald at elmit.com> skrev i en meddelelse 
>news:42636978.3040807 at elmit.com...
>  
>
>>tgj wrote:
>>
>>    
>>
>>>Hi Ronald,
>>>
>>>I must admit I am getting confused now.
>>>
>>>I understand that you have a problem getting Speed Dial Buttons to work. 
>>>The problem as I understand it is that the calls are placed in the wrong 
>>>context.
>>>
>>>To solve that problem I have asked you to make sure that you have typed a 
>>>valid context on the configuration page. Have you tried that?
>>>
>>>I think thats all you need to do, how do I post an example of that? It's a 
>>>fairly easy thing to do.
>>>
>>>Thorben
>>>
>>>
>>>      
>>>
>>
>>What is the right syntax to do that?
>>Context for dialing a trunk line is trunkint
>>Peter has the phone number 011-234-5678
>>How to set it up as a speed dial number? Below are all info you may need:
>>
>>The phone 601 (= Monitor extension) is a Sip phone,
>>
>>[general]
>>context=default            ; Default context for incoming calls
>>
>>[601]
>>type=friend
>>username=601
>>secret=dont+tell+you
>>canreinvite=no
>>host=dynamic
>>dtmfmode=rfc2833
>>mailbox=601 at other
>>nat=yes
>>callgroup=1
>>pickupgroup=1
>>callerid="Ronald Hotline",<601>
>>qualify=1000
>>
>>
>>extensions.conf
>>[default]
>>...
>>include => trunkint
>>...
>>
>>[trunkint]
>>;
>>; International long distance through trunk
>>;     .....  other lines deleted
>>exten => _9011Z.,107,Dial(SIP/${EXTEN:1}@sip-provider)
>>exten => _9011Z.,108,hangup
>>
>>    
>>


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users