[Asterisk-Users] Rhino Channel Bank

[Dan Goscomb]

certainly do... and asterisk and the rhino see each other...


On Wed, 2005-04-20 at 08:38 -0400, BJ Weschke wrote:
>  I don't know about channel banks, but when you go T1 to T1 device
> with a cable, you need the RX/TX pairs cross connected. Do you have a
> T1 crossover cable in play or a straight through?
> 
> On 4/20/05, Dan Goscomb <dang at thebrokenkid.com> wrote:
> > Hi
> > 
> > I have just purchased a Rhino Channel Bank and am using it connected to
> > asterisk via a digium TE410P. I am having problems with connecting
> > phones to the channel bank.
> > 
> > I have channel one connected to a patch panel, a line adaptor
> > chonnecting the phone cord to the patch panel, and then the phone.
> > 
> > When i pick up the channel bank does not detect this. The phone does not
> > ring when called.
> > 
> > Using a multimeter i checked voltage across the line and its 48V all the
> > way up to the phone, so the wiring is fine...
> > 
> > Any ideas as to what could be wrong?
> > 
> > Regards
> > 
> > Dan Goscomb
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users