[Asterisk-Users] Setting SIP username for CallerID

[Ronald Wiplinger]

Gavin Hamill wrote:

>Hi :)
>
>When I send an incoming call to a queue, I'm doing this:
>
>exten => 6608140,1,SetCallerID(CCUK)
>exten => 6608140,2,SetCIDName(CCUK)
>exten => 6608140,3,Queue(ccuk,r)
>
>I want the phone to say 'CCUK' - the queue name is more important to know than 
>the incoming Caller ID :)
>
>Unfortunately the SIP phone (a cheapy using the PA168S chip and 1.42 firmware) 
>displays the caller ID of "asterisk" when I do this, and it's clear why:
>
>---
>    -- outgoing agentcall, to agent '1601', on 'Local/1301 at internal-9175,1'
>    -- Called Agent/1601
>    -- Executing Dial("Local/1301 at internal-9175,2", "SIP/1301|20|t") in new 
>stack
>We're at 10.0.0.242 port 15334
>12 headers, 12 lines
>Reliably Transmitting (NAT) to 10.0.0.82:5060:
>INVITE sip:1301 at 10.0.0.82:5060 SIP/2.0
>Via: SIP/2.0/UDP 10.0.0.242:5060;branch=z9hG4bK70ccd454;rport
>From: "CCUK" <sip:asterisk at 10.0.0.242>;tag=as13d91518
>To: <sip:1301 at 10.0.0.82:5060>
>Contact: <sip:asterisk at 10.0.0.242>
>Call-ID: 3839ea357eba10bf3a4eb3ec75f7d4cb at 10.0.0.242
>CSeq: 102 INVITE
>User-Agent: Asterisk PBX
>Date: Wed, 20 Apr 2005 08:34:53 GMT
>Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
>Content-Type: application/sdp
>Content-Length: 260
>
>If I SetCallerID(12345678) then it is changed to sip:12345678 at 10.0.0.242 as 
>I'd expect, but if I use a string value, it stays at 
>'sip:asterisk at 10.0.0.242'
>
>So my question is, how can I change the sip username from 
><sip:asterisk at 10.0.0.242> to <sip:CCUK at 10.0.0.242> ?
>
>Am I doing something mind-bogglingly stupid?
>
Shouldn't be there a quote mark and two values, like:

SetCallerID("Ronald" <123456789>)


bye

Ronald