[Asterisk-Users] Installed ztdummy, Asterisk doesnt work anymore

[Matt Roth]

Michel,

Try this:

First:

cd /usr/lib/asterisk/modules/
rm *.so

Then:

Recompile Zaptel, then recompile Asterisk.  You may need to recompile 
anything else that put loadable modules into that directory, such as 
asterisk-addons, as well.

Does anyone out there know why "make clean" doesn't take care of this 
task?  I spent a few hours dealing with the same situation, assuming 
something was wrong with my config files or the new CVS release before I 
stumbled across this simple fix.  Some modules would fail with an error 
message, while others would seg fault.

I hope this was helpful,

Matthew Roth
http://voip-info.org/tiki-index.php?page=Running%20Asterisk%20on%20Debian

Michel Bachofen wrote:

> Hi
>
> Since Im using the mISDN drivers and no zaptel stuff, I had to install 
> ztdummy to get MeetMe to work. Well, that was the plan. Now, after 
> getting the latest zaptel version over CVS (Im using Kernel 2.6), 
> uncommenting all the modules except ztdummy in zaptel.sysconfig file 
> and compiling this by "make", "make install" and "make linux26", I 
> rebooted and recompiled Asterisk with "make install" again. Before all 
> this, Asterisk worked perfectly fine, incoming and outgoing 
> connections worked, everything did its job (except the MeetMe of 
> course). But now I get the following errors when starting up Asterisk:
>
> [ Booting.....................Apr 19 11:07:28 WARNING[6237]: 
> chan_zap.c:9615 setup_zap: Ignoring switchtype
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> pridialplan
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> overlapdial
> Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9436 setup_zap: Unknown 
> signalling method 'bri_cpe_ptmp'
> Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring 
> overlapdial
> Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9078 setup_zap: Signalling 
> must be specified before any channels are.
> Apr 19 11:07:28 WARNING[6237]: loader.c:345 ast_load_resource: 
> chan_zap.so: load_module failed, returning -1
> Apr 19 11:07:28 WARNING[6237]: loader.c:440 load_modules: Loading 
> module chan_zap.so failed!
>
> Now, I havent done anything to the zaptel.conf yet, Im not sure if I 
> even have to (didnt have that file before all this)?
>
> Looking forward to hearing anything in this matter :-(
>
> Michel
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>