[Asterisk-Users] Unable to specify channel 1: No such device

[pbx at itsngroup.com]

It looks like from the ztcfg output that you are trying to reference port
3, which is if your looking at the card with modules up. the one on the
far right.

Move the module to the far left... and that will be channel 1

The far left, is the TOP port on the card.

HIH


> Hi, I did not find any useful information to configure a Wildcard
> TDM400P with a FXO card. I've tried everithing, I tried configure it
> using the cvs and the information from digium page, I tried to
> configure it using
> debian packages, I tried to configure with kernels 2.4.30 and 2.6.11, I
> even
> switched the mother board (I tried 3 motherboards).
>