[Asterisk-Users] problem connecting multiple boxes via IAX2

[MobilPete]

central box connects to PSTN with T1 card

boxes 1-3 use IAX to connect to central box via IP and deliver in/out bound 
call to PSTN.
we have multiple division that connect to a central LD PRI.

really quit simple and using a LD PRI gives us much better LD pricing.

sorry about the confusion. Help with connection loss would be welcomed

----- Original Message ----- 
From: "Robert Webb" <asterisk at ropeguru.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>; "MobilPete" 
<mobilpete at voicecentricity.com>
Sent: Saturday, April 16, 2005 7:49 PM
Subject: RE: [Asterisk-Users] problem connecting multiple boxes via IAX2



> Senerio
> multiple * boxes connecting to a central * box with T1 card via IAX2.
> 1>box 1 abd 2 work fine all the time
> box 3 - after approx 10-15 minutes with no calls - central box with T1
> card
> fails to deliver incoming calls to box 3.
> Connectivity is good, * exten-2-exten good

Ok, I am completely confused about your setup. I thought IAX was used
over an IP connection. How do you have it setup by by connecting with a
T1 card?? I thought the T1 cards were for incoming voice from the telco
or a channel bank. Not used for IP...

Signed,
Confused??????