FW: [Asterisk-Users] USB Controller ztdummy
Michael Di Martino
mdm at telx.com
Fri Apr 15 14:22:31 MST 2005
Thanks
How do you use the rtc replacement with zaptel extensions
_____
From: Giudice, Salvatore [mailto:Salvatore.Giudice at FMR.COM]
Sent: Friday, April 15, 2005 5:11 PM
To: Michael Di Martino
Subject: RE: [Asterisk-Users] USB Controller ztdummy
Looks like you don't have a usb controller or if you compiled a custom
kernel, you may have not installed/loaded a usb module. If the system is
single cpu, you can use a rtc replacement with zaptel extensions or you
can buy even a lowly fxo card. Either will supply a clock.
_____
From: Michael Di Martino [mailto:mdm at telx.com]
Sent: Friday, April 15, 2005 3:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] USB Controller ztdummy
I am attempting my fist asterisk install.
I do not have any digum cards so use ztdummy.
However according to the Asterisk install guide it says to look for one
of the
following USB controller chips.
UHCI USB controller of OHCI USB Controller.
However, when I run lsmod to determine which have neither show up.
Can I continue the install and if I do will I have timing issues?
This is the output of lsmod
[root at Ask-NY17S root]# lsmod
Module Size Used by
ipv6 184288 10
parport_pc 19392 0
lp 8236 0
parport 29640 2 parport_pc,lp
autofs4 10624 0
sunrpc 101064 1
e1000 68492 0
floppy 47440 0
sg 27552 0
microcode 4768 0
binfmt_misc 7176 1
dm_mod 33184 0
button 4504 0
battery 6924 0
asus_acpi 8472 0
ac 3340 0
ext3 102376 2
jbd 40216 1 ext3
ata_piix 5380 3
libata 29312 1 ata_piix,[permanent]
sd_mod 16384 5
scsi_mod 91344 3 sg,libata,sd_mod
[root at Ask-NY17S root]#
Regards,
Michael
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050415/eb44c2cf/attachment.htm
More information about the asterisk-users
mailing list