[Asterisk-Users] Keypad disabled on AriaVoice SIP phone -- Fixed

[Ian Pattison]

The 1.41 firmware from AriaVoice fixed this one for me.

>>> ianp at technologyassociates.ca 06/04/2005 13:34 >>>
Hi All,

I've got a couple of AriaVoice C-301P SIP phones connecting to * and have a bit of a problem. I can dial out with no problem but once * bridges the call to another channel (such as a Zap channel to the PSTN or an internal Analog phone) it appears that the keypad is then disabled which keeps me from navigating other peoples IVR trees. I've seen some ramblings on DTMF relay (usually when applied to Cisco products) but don't know if that's my issue at all. I've tried both RFC2833 and Inband Audio for DTMF handling with identical results. It literally appears that the keypad is being disabled after dialling. 

I've attempted to contact the vendor of the phones several times and have been unsuccessful in reaching anyone.

Anyone had a similar experience?

A snapshot of the phone's config can be seen at http://www.technologyassociates.ca/phone.jpg 

Thanks,

Ian

Ian Pattison, Senior Analyst
Technology Associates Inc.
Tel: 905-459-2100 ext. 204
Mobile: 416-568-6548
E-mail: ianp at technologyassociates.ca