[Asterisk-Users] Zap won't dial out?

[Tim Connolly]

	I'm still seeing all sorts of oddness that won't go away until I
restart. It even killed inbound calls the last time around. Are there any
usefull troubleshooting commands I could run when this occurs?


Apr 14 10:43:56 WARNING[14794] chan_zap.c: Ring requested on channel 0/1
already in use on span 1.  Hanging up owner.
Apr 14 10:43:56 WARNING[14794] chan_zap.c: Unable to allocate channel
structure
Apr 14 10:43:56 WARNING[14794] chan_zap.c: Unable to start PBX on channel
0/22, span 1
Apr 14 10:43:56 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:43:56 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:00 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:00 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:18 WARNING[14794] chan_zap.c: Ring requested on channel 0/1
already in use on span 1.  Hanging up owner.
Apr 14 10:44:18 WARNING[14794] chan_zap.c: Unable to allocate channel
structure
Apr 14 10:44:18 WARNING[14794] chan_zap.c: Unable to start PBX on channel
0/22, span 1
Apr 14 10:44:18 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:18 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:22 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:22 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:28 WARNING[14794] chan_zap.c: Ring requested on channel 0/1
already in use on span 1.  Hanging up owner.
Apr 14 10:44:28 WARNING[14794] chan_zap.c: Unable to allocate channel
structure
Apr 14 10:44:28 WARNING[14794] chan_zap.c: Unable to start PBX on channel
0/22, span 1
Apr 14 10:44:28 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:28 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:32 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:32 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:46 WARNING[14794] chan_zap.c: Ring requested on channel 0/1
already in use on span 1.  Hanging up owner.
Apr 14 10:44:46 WARNING[14794] chan_zap.c: Unable to allocate channel
structure
Apr 14 10:44:46 WARNING[14794] chan_zap.c: Unable to start PBX on channel
0/22, span 1
Apr 14 10:44:46 WARNING[14794] chan_zap.c: Call specified, but not found?
Apr 14 10:44:46 WARNING[14794] chan_zap.c: Hangup on bad channel 0/22 on
span 1
Apr 14 10:44:50 WARNING[18896] chan_zap.c: PRI: !! Got I-frame while link
state 2

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Connolly
Sent: Thursday, April 14, 2005 10:20 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Zap won't dial out?

	I copied a working example which I now realize was a single FXO...
No wonder it wasn't working. Since I switched to TRUNK => ZAP/g1 it seems to
be working much better (i.e. no failures yet!) :)

Thanks for the help!

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling
Sent: Thursday, April 14, 2005 10:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Zap won't dial out?

No.  Dial(Zap/1/xxxx) will dial out ONLY on channel 1 of the T-1.

Tim Connolly wrote:

> Could this be caused by using dial commands like dial(ZAP/1/xxxx)
instead
> of using ZAP/g1/xxxxx  ???? I assumed if you have only one T1, the Zap/1
and
> Zap/g1 were the same. Is this correct?
> 
>  
> 
>   _____  
> 
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Connolly
> Sent: Thursday, April 14, 2005 9:30 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: [Asterisk-Users] Zap won't dial out?
> 
>  
> 
> Apr 14 08:52:44 NOTICE[13947] app_dial.c: Unable to create channel of type
> 'ZAP' (cause 0)
> 
> Apr 14 08:56:52 NOTICE[13947] app_dial.c: Unable to create channel of type
> 'ZAP' (cause 0)
> 
>  
> 
> I just started seeing this anytime I try to call out on my TE110XP. I can
> still receive calls, but no outgoing calls work. Using RHES4 w/Asterisk
> CVS-HEAD-04/11/05-22:51:51. A 'restart now' fixes it, but I can't find the
> reason for it. Any idea what would cause this?
> 
>  
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
Always do right. This will gratify some people and astonish the rest.
Mark Twain
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users