[Asterisk-Users] IAX2 - Between two ASterisk Servers

[Colin Anderson]

Use the same context that your SIP phones on the target Asterisk server use.
If you are using AMP, try the context "from-internal"

-----Original Message-----
From: Chris [mailto:listmail at odisok.net]
Sent: Wednesday, April 13, 2005 8:54 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAX2 - Between two ASterisk Servers


    Ok, it seems to be working to some degree.   The IAX debug comes back
with " No such context/extension"     I did a search on the archive and the
only thing I could find is that the receiving machine needs the context=
I have this in the user section of the IAX.conf.   It points to the same
context the zap channels use.   I am trying to dial a SIP extension.    Any
ideas?

Regards,

Chris

----- Original Message ----- 
From: "Colin Anderson" <ColinA at landmarkmasterbuilder.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Sent: Tuesday, April 12, 2005 4:40 PM
Subject: RE: [Asterisk-Users] IAX2 - Between two ASterisk Servers


> >The AMP configuration didn't work so I decided to work up from the Wiki
> example.   Can anyone help?
> 
> This is a good config using AMP:
> 
> http://sourceforge.net/docman/display_doc.php?docid=26418&group_id=121515
> 
> HTH
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users