[Asterisk-Users] (no subject)

[Sascha Ferley]

Hi,
I have just bought another TDM400P card from Digium directly, purchased
last Thursday, received it today:

Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
           1 WCTDM/0/0 FXOKS (In use)
           2 WCTDM/0/1 FXOKS (In use)
           3 WCTDM/0/2 FXSKS (In use)
           4 WCTDM/0/3 FXSKS (In use)

So it seems that this is the same problem. I also find it strange that
this card also has some intermittend issues with audio quality. We here
are currently testing multiple different PBX solutions from Nortel BCM
through Avaya and cisco to asterisk. Asterisk deffinitly has potential,
though when cards have sound issues, that aint great.
I hope Digium will send some sort of firmware upgrade procedure, if even
possible.

S.


On Mon, 11 Apr 2005, Robert Webb wrote:

>
> Good morning all..
>
> I was following a discussion on this list about the
> TDM400P revisions. It is my understanding that the current
> revision that one should have is the Rev. H and not the
> E/F. I have not yet been able to verify the rev stamped on
> the board, but zaptel is reporting that I have the Rev.
> E/F. I just bought this card in January direct from Digium
> and was wondering if I got the wrong Rev. somehow?? I have
> been having some intermittent problems but only thought it
> was my setup.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>