[Asterisk-Users] Cann't get CallerID on Zap channel, Please Help!!
Dominic Lu
fun at dominic.idv.tw
Mon Apr 11 21:54:16 MST 2005
Hi
Thanks!
The zapata.conf is as followings,
I also check the callerid used here, it's ETSI Standard ETS 300-659-1(both FSK and DTMF Caller ID transmission formats )
FSK use Dual Tone Alerting Signal (DTAS) as the start signal, DTMF seems no start signal("start" digit only)
http://www.adventinstruments.com/resources/giart/giSTD3a.htm
http://www.ainslie.org.uk/callerid/cli_faq.htm
Can anybody help?
[channels]
context=default
signalling=fxs_ks
usecallerid=yes
cidsignalling=v23
cidstart= polarity
hidecallerid=no
callwaiting=yes
usecallingpres=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=10.0
group=1
callgroup=1
immediate=no
callerid=asreceived
busydetect=yes
busycount=6
channel => 1-4
---------- Original Message -----------
From: Remco Barende <asterisk at barendse.to>
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Sent: Sun, 10 Apr 2005 12:09:13 +0200 (CEST)
Subject: Re: [Asterisk-Users] Cann't get CallerID on Zap channel, Please Help!!
> It would help if you would include your config files and state what type
> of FXO device you have
>
> On Sun, 10 Apr 2005, Dominic Lu wrote:
>
> > Hello Sir,
> >
> > I use FXO card but cann't get CallerID.
> > Here is Taiwan and the callered follows ETSI in permitting DTMF and FSK signals
> > (Seems same to that in Australia and New Zealand, based on Bellcore)
> >
> > Does anybody know what's the cadence setting will be in zapata.conf, so that I can get the CallerID on Zap channel?
> >
> > Thanks a lot!!
> >
> > BR, Dominic Lu
> >
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
------- End of Original Message -------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050411/b9c2f8dc/attachment.htm
More information about the asterisk-users
mailing list