[Asterisk-Users] SIP outgoing problem

[Eric Wieling]

snacktime wrote:

> On Apr 10, 2005 5:28 PM, Paul <junk at irqx.com> wrote:
> 
>>I have a Sipura SPA-841. I have configured my SIP.conf and extensions.conf
>>to allow the phone to dial an outside number via my Zap/2 PSTN. When I pick
>>up the handset I get a dialtone, however, when I press 9, the dialtone
>>stops. I assumed it would pause for a moment and give me another dialtone
>>for dialing my outside number. This phone has a softkey that's labeled
>>"Dial".....if you dial a number, you have to either wait for a few moments
>>for the line to pick up, or press the dial softkey and it will dial the
>>number. If I dial "92125551212" and then press dial, it will dial out. I
>>would like to be able to pick up the handset, press 9, get a dialtone and
>>then dial the 10 digit number without having to press any softkeys. Does
>>anyone have any ideas??
>>
>>Paul
> 
> 
> This should help...
> 
> http://www.voip-info.org/wiki-Asterisk+cmd+DISA

Talk about the blind leading the blind.

You configure the dialplan for your SIP device ON THE SIP DEVICE. 
DISA is an ugly hack and should only be used to provide dialtone to 
devices in the case of the device being too stupid to have a 
configurable dialplan.  The SIPura devices have a powerful dialplan 
featureset.  You just have to read the docs to understand them. 
SIPura has the docs for their products online.  Read them.

-- 
Always do right. This will gratify some people and astonish the rest.
Mark Twain