[Asterisk-Users] PRI Advice...

[Damon Estep]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Matt Loretitsch
> Sent: Thursday, April 07, 2005 9:16 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] PRI Advice...
> 
> Looking for some help any way I can.  I've been closely following
> digium's troubleshooting steps and seem to be okay there.  I am
> connecting, via PRI, to a Definity system.  When I release the board
on
> the Definity side I get this in Asterisk:
> 
> *CLI> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI
> got event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr  7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> 
> I've spent about 30 hours so far troubleshooting this problem to no
> avail with Digium and Avaya.  I followed the wiki instruction to start
> with and have been tweaking and recompiling since then.  I tried
direct
> wiring and also using the csu from Avaya.  Started with the latest
from
> CVS and have cleaned up and gone back to the stable cvs release.  Any
> advice would be much appreciated!  The avaya side says the d-channel
is
> out of service.
> 
> Configs:
> /etc/zaptel.conf
> Loadzone=us
> defaultzone=us
> span=1,1,0,d4,b8zs
> bchan=1-4 #number of channels   (Yes I'm only using 4 channels for
now)
> dchan=24 #dchannel
> 
> /etc/asterisk/zapata.conf
> [channels]
> context=default
> signalling=pri_net
> switchtype=national
> ;echocancel=yes
> ;echocancelwhenbridged=yes
> ;echotraining=400
> callerid=asreceived
> group=1
> channel=>1-4
> overlapdial=yes


Search www.voip-info.org (wiki) I remember seeing a config posted where
* and a definity were connected.