[Asterisk-Users] capi segfault when incoming call is answered

[Craig Guy]

Try disabling early B3 disconnect.  I had similar symptoms with a fritz!
card with early B3 enabled.

Craig

----- Original Message ----- 
From: "Thomas Andrews" <tandrews at grok.co.za>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, April 07, 2005 5:22 PM
Subject: Re: [Asterisk-Users] capi segfault when incoming call is answered


> On Thu, Apr 07, 2005 at 10:15:09AM +0200, Thomas Andrews wrote:
>
> > I have a Fritz! card set up to use capi, however when incoming calls to
> > the card are answered, asterisk segfaults.
>
> Just for the record, my capi.conf looks like this:
>
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> [interfaces]
> msn=1842
> incomingmsn=*
> controller=1
> softdtmf=1
> accountcode=
> context=isdn-test
> devices=2
>
> And the relevant bit in extensions.conf looks like this:
>
> [isdn-test]
> exten => s,1,Dial(Zap/7)
>
> Many thanks,
> Thomas
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users