[Asterisk-Users] Fritz Card ISDN in UK - Unable to dial.0x3301/0x3302 errors

[Craig Guy]

Which fritz! driver are you using?  the AVM, or mISDN?  Also, are you
certain your line is in point to multipoint mode rather than point to point?
DID requires point to point, and at this time I'm not aware of anyone
getting it working with the Fritz! card.

Craig

----- Original Message ----- 
From: "Paul Redstone" <paul.redstone at solica.com>
To: "Asterisk User" <asterisk-users at lists.digium.com>
Sent: Wednesday, April 06, 2005 5:58 PM
Subject: [Asterisk-Users] Fritz Card ISDN in UK - Unable to
dial.0x3301/0x3302 errors


> Hi
>
> Repeated e-mail as I forgot to make plain text - sorry and then forgot
subject
> line. Newbie asterisk guy here and forgive this slightly long mail, but
I'm
> stuck on this for a week.
>
> I'm having major problems getting a Fritz card to dial out in the UK (or
indeed
> answer, but I've been concentrating on dialing out). I'm getting the
0x3301 or
> 0x3302 error.
> My capi.conf file is:
> --------------
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> [interfaces]
> msn=1580XXXXXX  (the x's are replaced with our full msn)
> incomingmsn=*
> controller=1
> softdtmf=1
> accountcode=
> context=bodiam  (and the bodiam context includes bodiam-out)
> ;echosquelch=1
> ;echocancel=yes
> ;echotail=64
> ;callgroup=1
> ;deflect=12345678
> devices=2
>
> The significant part of my extensions.conf is:
> ------------------------------
> [bodiam-out]
> exten => _9.,1,StripMSD,1
> exten => _.,2,NoOp("Test1")
> exten => _.,3,Dial,CAPI/1580xxxxxx:BYEXTENSION,30,r  (x's replaced with
full
> msn)
> exten => _.,4 NoOp("test2")
> exten => _.,5,Congestion
>
> The output when enabling CAPI is
> -----------------------------------------
>    -- Executing StripMSD("SIP/202-5a30", "1") in new stack
>    -- Executing NoOp("SIP/202-5a30", ""Test1"") in new stack
>    -- Executing Dial("SIP/202-5a30", "CAPI/1580xxxxxx:BYEXTENSION") in new
> stack
>    -- data = 1580xxxxxx:01580yyyyyy
>    -- capi request omsn = 1580xxxxxx
>  == found capi with omsn = 1580xxxxxx
>  == CAPI Call CAPI[contr1/1580xxxxxx]/0     -- Called
1580xxxxxx:01580yyyyyy
> (01580xxxxxx has msn; 01580yyyyyy is number being called)
>    -- CONNECT_CONF ID=001 #0x0004 LEN=0014
>  Controller/PLCI/NCCI            = 0x101
>  Info                            = 0x0
>  == received CONNECT_CONF PLCI = 0x101 INFO = 0
>    -- DISCONNECT_IND ID=001 #0x0005 LEN=0014
>  Controller/PLCI/NCCI            = 0x101
>  Reason                          = 0x3301
>  == DISCONNECT_IND PLCI=0x101 REASON=0x3301
>  == No one is available to answer at this time
> Apr  6 07:51:34 WARNING[576]: pbx.c:1291 pbx_extension_helper: No
application
> '' for extension (bodiam, 01580yyyyyy, 4)
>  == Spawn extension (bodiam, 01580830902, 4) exited non-zero on
'SIP/202-5a30'
>
> ------------------------
> Sometimes I get 0x3302.
> The ISDN line being used is one normally used by our conventional PABX so
we
> know it works - we just plug it into the Fritz card instead.
> capi info shows the channels are recognised and free in Asterisk.
> capiinfo in command prompt shows:
> Controller 1:
> Manufacturer: AVM GmbH
> CAPI Version: 2.0
> Manufacturer Version: 3.17-02  (49.18)
> Serial Number: 1000001
> BChannels: 2
> Global Options: 0x00000039
>   internal controller supported
>   DTMF supported
>   Supplementary Services supported
>   channel allocation supported (leased lines)
> B1 protocols support: 0x4000011f
>   64 kbit/s with HDLC framing
>   64 kbit/s bit-transparent operation
>   V.110 asynconous operation with start/stop byte framing
>   V.110 synconous operation with HDLC framing
>   T.30 modem for fax group 3
>   Modem asyncronous operation with start/stop byte framing
> B2 protocols support: 0x00000b1b
>   ISO 7776 (X.75 SLP)
>   Transparent
>   LAPD with Q.921 for D channel X.25 (SAPI 16)
>   T.30 fro fax group 3
>   ISO 7776 (X.75 SLP) with V.42bis compression
>   V.120 asyncronous mode
>   V.120 bit-transparent mode
> B3 protocols support: 0x800000bf
>   Transparent
>   T.90NL, T.70NL, T.90
>   ISO 8208 (X.25 DTE-DTE)
>   X.25 DCE
>   T.30 for fax group 3
>   reserved
>  0100
>  0200
>  39000000
>  1f010040
>  1b0b0000
>  bf000080
>  00000000 00000000 00000000 00000000 00000000 00000000
>  01000001 00020000 00000000 00000000 00000000
> Supplementary services support: 0x000003ff
>   Hold / Retrieve
>   Terminal Portability
>   ECT
>   3PTY
>   Call Forwarding
>   Call Deflection
>   MCID
>   CCBS
> ----------------------
> The 0x3301 and 3302 errors seem to be protocol ones and it 'feels' like
some
> sort of country configuration issue or something like that. Can any one
give me
> any advice/help on this as I'm been stuck on this for a week.
> Many thanks
>
> Paul
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users