[Asterisk-Users] zaptel not starting issues

[Cameron Beattie]

According to an earlier post:
The TDM card only needs the external power connector "if" fxs modules
are installed. The fxo modules don't use it that power.
If fxs modules are present, only the 12 volt lead is used.

Regards

Cameron
----- Original Message ----- 
From: Terry Wade
To: asterisk-users at lists.digium.com
Sent: Tuesday, April 05, 2005 9:08 PM
Subject: [Asterisk-Users] zaptel not starting issues


Hi Guys

I have been running a test system of asterisk on a PIII 550 machine and now 
I want to implement it. I have a digium TDM02B card. I am running on 
Mandrake 10.1. I have now moved it to a PIII 1.2 backplane server and now I 
cant get the wcfxs module to load. I have also tried wctdm. I did all the 
udev mods and the install didn't have any errors. I am currently running * 
v1.0.7 stable.

I have googled and have not come up with anything concrete. Error is as 
follows: ZT_CHANCONFIG failed on channel 4: No such device or address (6). I 
only have 1 FXO module in at the moment, and have moved it through all the 
positions.

Does the card need the power  in the back to correctly start it?

Kind Regards

Terry Wade
Mobile: +27 82 802-5750
Office: +27 11 784-7642
Fax: +27 11 388-0855

Disclaimer and Confidentiality Warning

This message is intended for the addressee only. If you are not the intended 
recipient of this message, you are notified that any distribution, use of or 
copying of this communication is strictly prohibited. If you have received 
the communication in error, please notify the sender immediately. The views 
and opinions expressed in this message are those of the individual sender of 
this message and do not necessarily represent the views and opinions of 
ActiCom. Consequently, ActiCom does not accept responsibility for such views 
and opinions and this message should not be read as representing the views 
and opinions of ActiCom without subsequent written confirmation. Each page 
attached hereto must also be read in conjunction with this disclaimer.




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users