[Asterisk-Users] new user TDM400P and T1 card problems

Tue Apr 5 14:27:47 MST 2005

Hi I'm setting this new system up for the first time and am also a new Linux user. 

 Suse Linux 9.2 
 2x TDM400P cards, one with four fxo and the other with four fxs modules 
 TE110P T1 card 

 I downloaded and compiled zaptel and asterisk without problem, and created sample config files and then edited them to reflect what is recommended in the FAQ: 

 http://www.digium.com/index.php?menu=faq#Configuration_0 

 When I try to insert zaptel I get: 

 zaptel: unsupported module, tainting kernel. 
 Zapata Telephony Interface Registered on major 196 
 wct1xxp: unsupported module, tainting kernel. 
 wct1xxp: disagrees about version of symbol zt_receive 
 wct1xxp: Unknown symbol zt_receive 
 wct1xxp: disagrees about version of symbol zt_ec_chunk 
 wct1xxp: Unknown symbol zt_ec_chunk 
 wct1xxp: disagrees about version of symbol zt_transmit 
 wct1xxp: Unknown symbol zt_transmit 
 wct1xxp: disagrees about version of symbol zt_rbsbits 
 wct1xxp: Unknown symbol zt_rbsbits 
 wct1xxp: disagrees about version of symbol zt_unregister 
 wct1xxp: Unknown symbol zt_unregister 
 wct1xxp: disagrees about version of symbol zt_register 
 wct1xxp: Unknown symbol zt_register 
 wct1xxp: disagrees about version of symbol zt_alarm_notify 
 wct1xxp: Unknown symbol zt_alarm_notify 
 wct1xxp: unsupported module, tainting kernel. 
 wct1xxp: disagrees about version of symbol zt_receive 
 wct1xxp: Unknown symbol zt_receive 
 wct1xxp: disagrees about version of symbol zt_ec_chunk 
 wct1xxp: Unknown symbol zt_ec_chunk 
 wct1xxp: disagrees about version of symbol zt_transmit 
 wct1xxp: Unknown symbol zt_transmit 
 wct1xxp: disagrees about version of symbol zt_rbsbits 
 wct1xxp: Unknown symbol zt_rbsbits 
 wct1xxp: disagrees about version of symbol zt_unregister 
 wct1xxp: Unknown symbol zt_unregister 
 wct1xxp: disagrees about version of symbol zt_register 
 wct1xxp: Unknown symbol zt_register 
 wct1xxp: disagrees about version of symbol zt_alarm_notify 
 wct1xxp: Unknown symbol zt_alarm_notify 
 Linux Kernel Card Services 
   options:  [pci] [cardbus] [pm] 
 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found 
 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex 
 NET: Registered protocol family 17 
 PCI: Enabling device 0000:00:1f.5 (0004 -> 0005) 
 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177 
 PCI: Setting latency timer of device 0000:00:1f.5 to 64 
 NET: Registered protocol family 10 
 Disabled Privacy Extensions on device c03c4f00(lo) 
 IPv6 over IPv4 tunneling driver 
 intel8x0_measure_ac97_clock: measured 49563 usecs 
 intel8x0: clocking to 48000 
 ACPI: Power Button (FF) [PWRF] 
 ACPI: Processor [CPU0] (supports C1) 
 ACPI: Processor [CPU1] (supports C1) 
 powernow: This module only works with AMD K7 CPUs 
 Non-volatile memory driver v1.2 
 end_request: I/O error, dev fd0, sector 0 
 end_request: I/O error, dev fd0, sector 0 
 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] 
 parport0: irq 7 detected 
 lp0: using parport0 (polling). 
 drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic 
 usbcore: registered new driver usbserial_generic 
 usbcore: registered new driver usbserial 
 drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 
 bootsplash: status on console 0 changed to on 
 Disabled Privacy Extensions on device f70fcc00(sit0) 
 eth0: no IPv6 routers present 
 cdrom: open failed. 
 end_request: I/O error, dev fd0, sector 0 
 cdrom: open failed. 
 subfs: unsuccessful attempt to mount media (256) 
 end_request: I/O error, dev fd0, sector 0 
 end_request: I/O error, dev fd0, sector 0 
 subfs: unsuccessful attempt to mount media (256) 
 cdrom: open failed. 
 cdrom: open failed. 
 subfs: unsuccessful attempt to mount media (256) 
 end_request: I/O error, dev fd0, sector 0 
 end_request: I/O error, dev fd0, sector 0 
 end_request: I/O error, dev fd0, sector 0 

 I also get these "disagrees about version of symbol" errors trying to run modprobe wcfxo and wcusb.  When I try to run ztcfg I get: 

 Zaptel Configuration 
 ====================== 

 SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 

 Channel map: 

 Channel 01: Individual Clear channel (Default) (Slaves: 01) 
 Channel 02: Individual Clear channel (Default) (Slaves: 02) 
 Channel 03: Individual Clear channel (Default) (Slaves: 03) 
 Channel 04: Individual Clear channel (Default) (Slaves: 04) 
 Channel 05: Individual Clear channel (Default) (Slaves: 05) 
 Channel 06: Individual Clear channel (Default) (Slaves: 06) 
 Channel 07: Individual Clear channel (Default) (Slaves: 07) 
 Channel 08: Individual Clear channel (Default) (Slaves: 08) 
 Channel 09: Individual Clear channel (Default) (Slaves: 09) 
 Channel 10: Individual Clear channel (Default) (Slaves: 10) 
 Channel 11: Individual Clear channel (Default) (Slaves: 11) 
 Channel 12: Individual Clear channel (Default) (Slaves: 12) 
 Channel 13: Individual Clear channel (Default) (Slaves: 13) 
 Channel 14: Individual Clear channel (Default) (Slaves: 14) 
 Channel 15: Individual Clear channel (Default) (Slaves: 15) 
 Channel 16: Individual Clear channel (Default) (Slaves: 16) 
 Channel 17: Individual Clear channel (Default) (Slaves: 17) 
 Channel 18: Individual Clear channel (Default) (Slaves: 18) 
 Channel 19: Individual Clear channel (Default) (Slaves: 19) 
 Channel 20: Individual Clear channel (Default) (Slaves: 20) 
 Channel 21: Individual Clear channel (Default) (Slaves: 21) 
 Channel 22: Individual Clear channel (Default) (Slaves: 22) 
 Channel 23: Individual Clear channel (Default) (Slaves: 23) 
 Channel 24: D-channel (Default) (Slaves: 24) 
 Channel 25: FXO Kewlstart (Default) (Slaves: 25) 
 Channel 26: FXO Kewlstart (Default) (Slaves: 26) 
 Channel 27: FXO Kewlstart (Default) (Slaves: 27) 
 Channel 28: FXO Kewlstart (Default) (Slaves: 28) 
 Channel 29: FXS Kewlstart (Default) (Slaves: 29) 
 Channel 30: FXS Kewlstart (Default) (Slaves: 30) 
 Channel 31: FXS Kewlstart (Default) (Slaves: 31) 
 Channel 32: FXS Kewlstart (Default) (Slaves: 32) 

 32 channels configured. 

 ZT_SPANCONFIG failed on span 1: No such device or address (6) 

 Like I said this is all new to me so I'm not sure where to start.  It looks like the modules don't match the kernel?  Any ideas? 

 Thanks, 
 Ben 