[Asterisk-Users] new user TDM400P and T1 card problems

Tue Apr 5 14:24:04 MST 2005

Hi I'm setting this new system up for the first time and am also a new Linux user.

Suse Linux 9.2
2x TDM400P cards, one with four fxo and the other with four fxs modules
TE110P T1 card

I downloaded and compiled zaptel and asterisk without problem, and created sample config files and then edited them to reflect what is recommended in the FAQ:

http://www.digium.com/index.php?menu=faq#Configuration_0

When I try to insert zaptel I get:

zaptel: unsupported module, tainting kernel.
Zapata Telephony Interface Registered on major 196
wct1xxp: unsupported module, tainting kernel.
wct1xxp: disagrees about version of symbol zt_receive
wct1xxp: Unknown symbol zt_receive
wct1xxp: disagrees about version of symbol zt_ec_chunk
wct1xxp: Unknown symbol zt_ec_chunk
wct1xxp: disagrees about version of symbol zt_transmit
wct1xxp: Unknown symbol zt_transmit
wct1xxp: disagrees about version of symbol zt_rbsbits
wct1xxp: Unknown symbol zt_rbsbits
wct1xxp: disagrees about version of symbol zt_unregister
wct1xxp: Unknown symbol zt_unregister
wct1xxp: disagrees about version of symbol zt_register
wct1xxp: Unknown symbol zt_register
wct1xxp: disagrees about version of symbol zt_alarm_notify
wct1xxp: Unknown symbol zt_alarm_notify
wct1xxp: unsupported module, tainting kernel.
wct1xxp: disagrees about version of symbol zt_receive
wct1xxp: Unknown symbol zt_receive
wct1xxp: disagrees about version of symbol zt_ec_chunk
wct1xxp: Unknown symbol zt_ec_chunk
wct1xxp: disagrees about version of symbol zt_transmit
wct1xxp: Unknown symbol zt_transmit
wct1xxp: disagrees about version of symbol zt_rbsbits
wct1xxp: Unknown symbol zt_rbsbits
wct1xxp: disagrees about version of symbol zt_unregister
wct1xxp: Unknown symbol zt_unregister
wct1xxp: disagrees about version of symbol zt_register
wct1xxp: Unknown symbol zt_register
wct1xxp: disagrees about version of symbol zt_alarm_notify
wct1xxp: Unknown symbol zt_alarm_notify
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
PCI: Enabling device 0000:00:1f.5 (0004 -> 0005)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.5 to 64
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c4f00(lo)
IPv6 over IPv4 tunneling driver
intel8x0_measure_ac97_clock: measured 49563 usecs
intel8x0: clocking to 48000
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
powernow: This module only works with AMD K7 CPUs
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
bootsplash: status on console 0 changed to on
Disabled Privacy Extensions on device f70fcc00(sit0)
eth0: no IPv6 routers present
cdrom: open failed.
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
subfs: unsuccessful attempt to mount media (256)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
cdrom: open failed.
cdrom: open failed.
subfs: unsuccessful attempt to mount media (256)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0

I also get these "disagrees about version of symbol" errors trying to run modprobe wcfxo and wcusb.  When I try to run ztcfg I get:

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: Individual Clear channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: Individual Clear channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: Individual Clear channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Clear channel (Default) (Slaves: 20)
Channel 21: Individual Clear channel (Default) (Slaves: 21)
Channel 22: Individual Clear channel (Default) (Slaves: 22)
Channel 23: Individual Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
Channel 25: FXO Kewlstart (Default) (Slaves: 25)
Channel 26: FXO Kewlstart (Default) (Slaves: 26)
Channel 27: FXO Kewlstart (Default) (Slaves: 27)
Channel 28: FXO Kewlstart (Default) (Slaves: 28)
Channel 29: FXS Kewlstart (Default) (Slaves: 29)
Channel 30: FXS Kewlstart (Default) (Slaves: 30)
Channel 31: FXS Kewlstart (Default) (Slaves: 31)
Channel 32: FXS Kewlstart (Default) (Slaves: 32)

32 channels configured.

ZT_SPANCONFIG failed on span 1: No such device or address (6)

Like I said this is all new to me so I'm not sure where to start.  It looks like the modules don't match the kernel?  Any ideas?

Thanks,
Ben