[Asterisk-Users] ISDN-30 in UK

[asterisk at sipex.co.uk]

The green light only means you can see the clock (sync) form the line and is
only indicative of low level connectivity. Confirm with your pto that the
circuit is activated and the signaling type. A good test to see if the line
is activated is to call one of it’s DDI numbers. If the display on the
mobile shows “error in connection” then this normally indicates that the
line is ok, the call is getting to your equipment but there is a
configuration fault. If you get NU then get PTO to check line.

Neil

________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Timothy Potter
Sent: 05 April 2005 12:04
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] ISDN-30 in UK

I just got my TE110P yesterday, I've got it showing a green stable light, so
all installed ok and seeing BT's Network.
 
Can't get an outside line or get incoming. I've got 8 lines open on my
ISDN30.
 
I would greatly appreacate it, if you could email me the configs you used to
get it going.
 
Tim.
 
timothyjpotter at hotmail.com