[Asterisk-Users] Issues with ringing on FXS ports

[Richard Scobie]

Ian Pattison wrote:

> ringing. If I connect the GE cordless models I've been asked to use (0.1
> REN) they normally will not ring... they light up and indicate there's
> an incoming call and once or twice I've received 1/2 - 3/4 of a ring but
> never a complete ring or multiple rings. When connected directly to my
> incoming lines they ring normally. 
> 
> Normally I'd assume this was a power problem but at 0.1 REN?? Any other
> ideas I can try?
> 

Try adding the module parameter boostringer=1 when loading the wctdm 
driver. This raises the ringing volts to 89V peak.

Regards,

Richard