[Asterisk-Users] Re: question about asterisk

[Seth Remington]

On Fri, 2004-10-29 at 09:57, Olger Merlos Valverde wrote:

> Ok, only one question :), this card, (X100P) looks like one modem analog :) it's
> the same?? or have some diferents...
> Very thanks... :)
> 

It is an analog modem with a very specific Intel/Ambient chipset that
the wcfxo driver supports. If you are so inclined you could Google your
way to a lot more information about it. The general list consensus
though is to go with the X100P for two very good reasons...

1. You are supporting the project
2. You get technical support from Digium with your purchase.

-Seth

> 
> >
> > at minimum you will need one card: Wildcard X100P ...
> >
> > [IPphone-Office1]
> >      |
> > SIP/LAN
> >      |
> > [Aterisk-Office1]
> >      |
> > IAX/WAN
> >      |
> > [Asterisk-Office2]---[Wildcard-X100P]---analog---[PBX-Office2]-->PSTN
> >      |
> > SIP/LAN
> >      |
> > [IPphone-Office2]
> >
> > SIP IP phones are configured in /etc/asterisk/sip.conf
> > Wildcard X100P card is configured in /etc/zaptel.conf and
> > /etc/asterisk/zapata.conf
> > IAX link between two Asterisk servers is configured in /etc/asterisk/iax.conf
> >
> > Also relevant: /etc/asterisk/extensions.conf for dialplan
> >
> > use all of the above (sip.conf, iax.conf, etc etc) as keywords for
> > search at http://www.voip-info.org for details.
> >
> > rgds
> > benjk
> > --
> > Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya,
> > Tokyo, Japan.

-- 
Seth Remington
SaberLogic, LLC
661-B Weber Drive
Wadsworth, Ohio 44281
Phone: (330)335-6442
Fax: (330)336-8559