[Asterisk-Users] grandstream 102 flashing

[Andrew Yager]

On 22/10/2004, at 9:06 AM, dean collins wrote:

> Thanks for taking the time to reply ok.
>
> The phone is sending an arp-rarp request to 67.153.142.69
>
> The phone thinks it is ip address 192.168.0.160,
>
> I don't know how to set up a single pc to think it is the 67.153.142.69
> ip address and wouldn't it need something more than a tftp server at
> that address?

No it wouldn't (necessarily). If you connect the phone to your Windows 
2003 server using a crossover cable, and /add/ 67.153.142.69 as an IP 
address to any NIC (so your machine now has two IP addresses - 
192.168.0.x and 67.153.142.69), and then enable Routing and Remote 
access with one of the default configurations (router is in there 
somewhere...???), any request that goes via the 2003 machine to the 
67.x IP address will be handled by the 2003 machine.

Once the phone has a route to that address, it can begin to do its 
thing. You can grab the latest GS firmware from 
http://www.hellofone.com/downloads.html. Place that in the root 
directory of your TFTP server, and reboot the phone.

Should be OK from there.

If you have another desktop, you can test the resolution by putting it 
on a 192.168.0.x address and performing a tracert to the 67.x IP 
address.

I hope this is vaguely useful :-)

Andrew