[Asterisk-Users] T100P to Verizon Smart Jack Question

[Steven Critchfield]

On Mon, 2004-10-11 at 11:45 -0400, Cirelle Enterprises wrote:
> Has anybody had any experience connecting the t100p to 
> a verizon smart jack.
> 
> I've been told the t100p uses an RJ48 but not the revision
> (i.e. C, S, X )
> 
> I've created wires (RJ48C x-over) but no green light on the t100p

> i've created wire (RJ48S)  no green light
> (only because the HyperEdge Smart Jack says this is default 
> but can't confirm this to be true in my case).

> Standard RJ45 ether cable gets ligts on the card and smart jack
> but no signal

Then you should have noticed then that no cross over cable is necessary
to a smart jack. Only time to use a cross over cable is when connecting
2 end devices together.

> zttool indicates OK for both the t100p and the tdm04b cards (no alarms)
> I can ping the t100p but no further with the standard ether cable

Are you doing data or voice on the T100P? 
-- 
Steven Critchfield <critch at basesys.com>