[Asterisk-Users] TDM400P stop responding

[rich allen]

iH

have a TDM400 w/ 1 FXS & 1FXO card. after about a day or so the FXO 
stops working. after a  reboot i get the following error. to get the 
card working again i have to shutdown, physically unplug/replug the 
card (reboot only, power off/on does not work) any ideas what may be 
going wrong here?

thanks
- hcir

Zaptel Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)

2 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)