[Asterisk-Users] Re: RES: Working E1 MFC/R2 M?xico !!! (Steve Underwood)

[Steve Underwood]

There are a number of differences between the Brazil and Mexican 
variants. In fact, every country is different, and Columbia even has 
different variants for land lines and cellular. Mexico is the most 
troublesome to implement, as it introduces a whole new section the 
others do not have. The Brazilian variant is working OK with a Dialogic 
card in Brazilian R2 mode.

Regards,
Steve

Miguel wrote:

>Steve,
>
>Do you know if there are many differences between the Mexican and Brazilian
>variant ?
>
>Kind regards,
>
>Miguel Antonio
>
>Date: Tue, 05 Oct 2004 22:51:53 +0800
>From: Steve Underwood <steveu at coppice.org>
>Subject: Re: [Asterisk-Users] RES: Working E1 MFC/R2 M?xico !!!
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>	<asterisk-users at lists.digium.com>
>Message-ID: <4162B509.5000705 at coppice.org>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>I don't think getting the latest one matters for Brazil. All the changes 
>I made at the weekend were specific to the Mexican variant of R2.
>
>Regards,
>Steve
>
>Miguel Cavazos wrote:
>
>  
>
>>Hey miguel good to know, the configs are really the same as the 
>>examples only thing i did was change to mx the variant. How ever the 
>>most importat thing is for you to get the last file that steve 
>>underwood has in his ftp site. As i say before the only thing you have 
>>to change in the config is the variant for your contry thats br.
>>
>>Keep us post in your progress so we can know that R2 is working in 
>>other countrys!
>>
>>On 05/10/2004, at 6:45 AM, Miguel wrote:
>>
>>    
>>
>>>Miguel,
>>>
>>>I'm in Brazil and I'll try it with Embratel (a telmex company), may 
>>>you send
>>>me your configs ? Are there any special advice to implement it ?
>>>
>>>Kind regards,
>>>
>>>Miguel Antonio
>>>
>>>Date: Mon, 4 Oct 2004 15:18:22 -0500
>>>From: Miguel Cavazos <miguel at cavazos.com.mx>
>>>Subject: Re: RES: [Asterisk-Users] Working E1 MFC/R2 M?xico !!!
>>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>    <asterisk-users at lists.digium.com>
>>>Message-ID: <8A49819C-1642-11D9-BBE2-000D93ACD3E8 at cavazos.com.mx>
>>>Content-Type: text/plain; charset=US-ASCII; format=flowed
>>>
>>>the most i tryed was 5 incoming 5 outgoing but it think it wont be a
>>>problem to test the 30 channels
>>>On 04/10/2004, at 10:26 AM, Miguel wrote:
>>>
>>>      
>>>
>>>>Miguel,
>>>>
>>>>How many simultaneous calls (incoming and outgoing) you did ?
>>>>
>>>>Kind regards,
>>>>
>>>>Miguel
>>>>
>>>>Date: Sun, 3 Oct 2004 11:21:04 -0500
>>>>From: Miguel Cavazos <miguel at cavazos.com.mx>
>>>>Subject: [Asterisk-Users] Working E1 MFC/R2 M?xico !!!
>>>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>>    <asterisk-users at lists.digium.com>
>>>>Message-ID: <38EDCE02-1558-11D9-BBE2-000D93ACD3E8 at cavazos.com.mx>
>>>>Content-Type: text/plain; charset=US-ASCII; format=flowed
>>>>
>>>>Hello all, R2 in mexico (telmex) is working with steve underwood
>>>>libmfcr2, we have done here some test 5 incoming calls and 5 outgoing
>>>>with no problems. Thank you steve for all the support to this proyect,
>>>>I hope this week we can start testing other E1's like unefon, alestra,
>>>>axtel and others.
>>>>
>>>>-- 
>>>>Saludos,
>>>>Miguel Cavazos
>>>>        
>>>>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>