[Asterisk-Users] More than 20 FXS

[Nahuel Alejandro Ramos]

Thanks for the quick answer. I have seen this cards but how do I
convert an E1 to 30 FXS plugs? Sorry about my newbie question about
hardware. I have got working an Asterisk with Xlite and ATAs, but I
need a lot of internals phones.
Thank you again...

      Nahuel Ramos.


On Thu, 18 Nov 2004 14:09:24 -0500, Gregory Junker
<gregory.junker at dayark.com> wrote:
> Nahuel
> 
> Pick up one or more Carrier Access ADIT 600 channel banks off of eBay
> (they always come loaded down with FXS channels), grab a quad-span
> Digium TE410P (or TE405P, depends on your PCI capabilities) -- 4 T1/E1
> ports, that's 96/120 voice channels theoretical max -- and go to town. :)
> 
> http://www.digium.com/index.php?menu=hardware_products
> 
> All of that hardware works splendidly with Asterisk. You can peruse the
> Wiki for more information on configuring the beasts:
> 
> http://www.voip-info.org
> 
> Greg
> 
> 
> 
> Nahuel Alejandro Ramos wrote:
> > Hi everyone,
> >   Could someone tell me if I could make a Asterisk PBX + Digium
> > hardware with more than 20 FXS? If I have a 5 PCI PC, I could only
> > plug 5 TDM40B (4-port FXS) maximun. Is there a solution, a hardware in
> > Digium or something that let me have a PBX with about 50 or 100 FXS
> > and internal phone using a Asterisk PC.
> >   Thank you very much...
> >
> >          Nahuel Ramos.
> > _______________________________________________
> 
> 
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>