ASTERISK - RE: [Asterisk-Users] CallerID+Distinctive ring in Australia

[PHP Mechanic]

This works for me:
http://www.voip-info.org/tiki-index.php?page=Asterisk+and+Australian+Caller+ID

> Is this on analog or ISDN?
> A few of us discussed this a short while ago (call ID/Aust/analog) but
> nobody ever got anywhere.
> But I am sure that one of us will figure it all out soon enough.
>
> Later,
>
> PaulH
> Hawthorn
> Aust
>
> -----Original Message-----
> From: Elliot Mackenzie [mailto:asterisk at adixein.com]
> Sent: Tuesday, 9 November 2004 6:01 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] CallerID+Distinctive ring in Australia
>
> Whoops.  Apologies for sending this more than once.  I thought a sendmail
> upgrade had broken, but it was just slow :-)
>
> Someone mentioned there are some patches required to make callerid work in
> the UK.  Do similar patches apply for use in Australia?  How would I make 
> my
> own modifications?  Is there some way I can record the analog signal
> incoming and play it back to  figure out what asterisk is doing with it?
>
> Kind regards,
> Elliot.
>
> Elliot Mackenzie wrote:
>
>> I have a situation involving both caller id and distinctive ring in
>> australia that appears to be having issues.  I am using the CVS
>> snapshot current as of an hour ago.
>>
>> The distinctive ring was working ok until i arranged for the telco to
>> turn on callerid: now the distinctive ring detection appears flaky and
>> there is no callerid detected.
>> By flaky distinctive ring, I mean the three numbers that are being
>> detected on an incoming call (ever since callerid was switched on),
>> vary from [0,0,0] to more sensible numbers (sensible, though they
>> still vary by too much to make sense of).
>>
>> Once I have seen "callerID returned with error", but this only
>> happened once and said nothing further.  I haven't replicated this
>> message when I have had the debugging cranked right up unfortunately.
>>
>> There was a newspost a while back that suggested increasing a delay in
>> callerid.c, which I have done but to no avail.  I increased it from
>> "4000" to "5600", as per the original post.
>>
>> Does anyone have ideas for what to try, or for how to start digging
>> further?  This problem has been plaguing me for a month now.
>>
>> Kind regards,
>> Elliot.
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> CAUTION: This email message and accompanying data may contain information
> that is confidential. If you are not the intended recipient, you are
> notified that any use, dissemination, distribution or copying of this
> message or data is prohibited. If you have received this email message in
> error, please notify us immediately and erase all copies of this message 
> and
> attachments. Thank you.
>
> CAUTION: This email message and accompanying data may contain information 
> that is confidential. If you are not the intended recipient, you are 
> notified that any use, dissemination, distribution or copying of this 
> message or data is prohibited. If you have received this email message in 
> error, please notify us immediately and erase all copies of this message 
> and attachments. Thank you.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>