[Asterisk-Users] bri-stuff.0.0.2

[Karl Rannseier]

Hi there..

After starting ZapHFC following error ocours in messages:

May 30 14:22:04 linux3 kernel: Zapata Telephony Interface
Registered on major 196
May 30 14:22:04 linux3 kernel: zaphfc: no version for "zt_receive"
found: kernel tainted.
May 30 14:22:04 linux3 kernel: PCI: Found IRQ 5 for device
0000:00:12.0
May 30 14:22:04 linux3 kernel: zaphfc: card configured at mem
0xc8903000 fifo 0xc3f28000(0x3f28000) IRQ 5 HZ 1000
May 30 14:22:04 linux3 kernel: zaphfc: Card 0 configured for NT
mode
May 30 14:22:04 linux3 kernel: zaphfc: 1 hfc-pci card(s) in this
box.
May 30 14:22:04 linux3 kernel: Registered tone zone 3
(Netherlands)
May 30 14:22:19 linux3 kernel: zaphfc: bchan rx fifo not enough
bytes to receive! (z1=2013, z2=2006)
May 30 14:22:19 linux3 kernel: zaphfc: bchan rx fifo not enough
bytes to receive! (z1=2333, z2=2326)
May 30 14:22:19 linux3 kernel: zaphfc: bchan rx fifo not enough
bytes to receive! (z1=2373, z2=2366)
May 30 14:24:31 linux3 kernel: zaphfc: bchan rx fifo not enough
bytes to receive! (z1=8104, z2=8097)
May 30 14:24:31 linux3 kernel: zaphfc: bchan rx fifo not enough
bytes to receive! (z1=8104, z2=8097)

Is there a way to prevent this?


Yours,
Karl