[Asterisk-Users] * will not load, after latest CVS install

[Steven Critchfield]

On Fri, 2004-05-28 at 13:47, Barry Fawthrop wrote:
> Greetings
>  
> I was getting bad static crackle on a phone, so I reload from the
> latest CVS and did
> a make clean ; make install on zaptel, libpri and asterisk
>  
> Now I get this error
>  
> [chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
> May 28 13:59:42 WARNING[16384]: chan_skinny.c:2541 reload_config:
> Unable to get our IP address, Skinny disabled
> Urgent handler
>  [chan_oss.so] => (OSS Console Channel Driver)
>   == Console is full duplex
> May 28 13:59:42 WARNING[16384]: chan_oss.c:352 setformat: Requested
> 8000 Hz, got 48000 Hz -- sound may be choppy
> May 28 13:59:42 WARNING[147466]: chan_oss.c:238 sound_thread: Read
> error on sound device: Resource temporarily unavailable
>  [chan_phone.so] => (Linux Telephony API Support)
>  [chan_zap.so] => (Zapata Telephony w/PRI)
> May 28 13:59:42 WARNING[16384]: chan_zap.c:8030 setup_zap: Ignoring
> usercallerid

^^^^^^^^^^^^^^ typo, use not user.

> May 28 13:59:42 WARNING[16384]: chan_zap.c:704 zt_open: Unable to
> specify channel 1: No such device or address
> May 28 13:59:42 ERROR[16384]: chan_zap.c:5499 mkintf: Unable to open
> channel 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
> May 28 13:59:42 ERROR[16384]: chan_zap.c:7652 setup_zap: Unable to
> register channel '1'

> May 28 13:59:42 WARNING[16384]: loader.c:421 load_modules: Loading
> module chan_zap.so failed!

Check with ztcfg -vvv to see if you have any zap channels configured. If
not, either noload the chan_zap or fix the channel specification so it
doesn't bark on you.

-- 
Steven Critchfield <critch at basesys.com>