[Asterisk-Users] Re: Remote Disconnects

[Rich Adamson]

> Is there any way to debug the TE410P and see if it
> sees the loop start signals?

I don't have a 410P, but you might take a look at 
 /etc/asterisk/logger.conf
and add "debug" to the messages line. Restart asterisk and check
the /var/log/asterisk log files.
 
You can also try running asterisk from the command line (as opposed
to starting it via safe_asterisk) with switches -gdvvvvv.

> Using the fxs_ls settings, the TE410P does not see
> when the remote side drops the call.
> 
> Is e&m signaling a more reliable way to go?
 
e&m signaling was designed years ago to address the problems that
existed with loop start, so yes it is more reliable.