[Asterisk-Users] Failed to bind to 0.0.0.0:5060: Address already in use

[Stefan-Michael. Günther (in-put GbR)]

Jay Milk worte:
>Why don't you configure the IP address instead of leaving it 0.0.0.0?
>While that should work, it's always a good idea to be specific about
>your bindings.
> 
I already tested the configuration with

bindaddr=192.168.0.101

which is the correct ip of the asterisk box - same result: Address already in 
use.

Stefan


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
Stefan-Michael. G=FCnther (in-put GbR)
Sent: Friday, May 21, 2004 11:58 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Failed to bind to 0.0.0.0:5060: Address
already in use


 Hi,

I have a strange error, that I haven't yet found in another posting on
the  archive.  Here's my sip.conf:

[general]
port =3D 5060                     ; Port to bind to
bindaddr =3D 0.0.0.0              ; Address to bind SIP channel to
context =3D default               ; Default context for incoming calls
callerid=3DNo CallID


-- 

*****************************************
in-put GbR - Das Linux-Systemhaus
Stefan-Michael Günther
Moltkestraße 49	D-76133 Karlsruhe
Tel./Fax : +49 (0)721 / 83044 - 98/93
http://www.in-put.de
*****************************************