[Asterisk-Users] Dumb TDM400P question

[Rich Adamson]

Don't know if this helps, but my installed 4-port fxo card has the
rj11 jack closest to the pci edge connector as zap/4, and the rj11
away from the pci edge connector as zap/1. The board is installed
and working, so can't look at much more.

------------------------
> I have a TDM400P with 3 fxs and 1 fxo ports. I need to know which phone 
> connector corresponds to which module and also which port number. If we 
> are looking at the card with the PCI connector at the bottom, fxs/o 
> modules at the top and the phone jacks on the left - do the phone jacks 
> start at the top or the bottom (top is port 1 or bottom is port 1)? And 
> which phone jack belongs to which module (top phone = left module, or 
> top phone = right module)?
> 
>                          module a   module b   module c   module d
> 
> phone w
> phone x
> phone y
> phone z
> 
> w=a, x=b, y=c, z=d or w=d, x=c, y=b, z=a or something else?
> 
> and then is w=1, x=2, y=3, z=4 or z=1, y=2, x=3, w=4 or something else?
> 
> TIA
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------