[Asterisk-Users] Asterisk upgrade on production box

[Nik Martin]

I figured so, but searching for "upgrade" and "kernel" returned so many
irrelevant hits I threw in the towel.
;P

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> brian k. west
> Sent: Friday, May 21, 2004 7:23 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Asterisk upgrade on production box
> 
> 
> Yes you will need to recompile zaptel also.  This is comonly 
> talked about on the mailing list.
> 
> bkw
> 
> ----- Original Message ----- 
> From: "Nik Martin" <nmartin at radiancetech.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, May 21, 2004 5:17 PM
> Subject: RE: [Asterisk-Users] Asterisk upgrade on production box
> 
> 
> > Is it normal for asterisk to have to be recompiled when you upgrade 
> > your kernel?  I fetched a new kernel yesterday, taking me 
> from 2.4.25 
> > to 2.4.26 I built yesterday, and rebooted this afternoon. After 
> > upgrading, none of
> the
> > asterisk modules would load.  I assume they are dependent on the 
> > kernel
> they
> > were compiled against?
> >
> >
> >
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com
> > > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Brian 
> > > Cuthie
> > > Sent: Friday, May 21, 2004 3:52 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] Asterisk upgrade on production box
> > >
> > >
> > >
> > > I'm sure there are better ways, but I usually do the following:
> > >
> > > 1) make sure my current source directory is named something else 
> > > (see step 3)
> > >
> > > 2) fetch cvs head
> > >
> > > 3) mv asterisk to something like asterisk_cvs_head_5_21. 
> This keeps 
> > > all the old source trees around so that I can easily roll back to 
> > > any version I've installed previously.
> > >
> > > 4) cd to the new asterisk directory (whatever you called 
> it in step 
> > > 3)
> > >
> > > 5) make
> > >
> > > 7) asterisk -r
> > >
> > > 8) show channels to make sure nobody's using it
> > >
> > > 9) stop now
> > >
> > > 10) exit asterisk
> > >
> > > 11) make install
> > >
> > > 12) restart asterisk
> > >
> > > Note that if you don't 'make samples' the stuff in /etc/asterisk 
> > > won't get torched. This should be fine, assuming that the new
> > > version doesn't
> > > require any config changes. Naturally, you'll want to 
> poke around in
> > > asterisk/configs to see what kind of new options are available.
> > >
> > > -brian
> > >
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>