[Asterisk-Users] Making a SIP call

[David J Carter]

Check your sip.conf

Make sure the dtmfmode is set the same as the phone.

I had this before.

Usually to dial an IP address you have a keystroke before you enter the
address.
I think on a Grandstream phone you press the menu button then the IP
address.

Dave

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of
bclark at bwkip.com
Sent: 21 May 2004 21:57
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Making a SIP call


If someone could point me in the right direction I would much appreciate
it.  Here is my problem:

My directions for my sip phone says to dial an ip address 12*34*65*78#.
When I dial that into my phone my asterisk server is only picking up some
of the numbers in the above example it would pick up 6578.  Then of course
not find it and ring busy on the phone. The same is true for dialing a
regular phone number ( it seems to pick up 4 digits or so)

I very new to setting this up so I imagine I need to make a change to a
config file, but don't know where to start.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users