[Asterisk-Users] TDM400P problems with 1 FXS, 1 FXO

[David Creemer]

Following up with a thought experiment. If I start with one TDM400P, 
FXS module in slot 1, FXO module in slot 3, my zaptel.conf file looks 
like this:

fxoks=1
fxsks=3

If I were to put an X101P in this machine, and load the wcfxo module 
*first*, what would the zaptel.conf channel list look like? This?

fxsks=1,4
fxoks=2

If I load wcfxo *after* wcfxs, would it be this?:

fxoks=1
fxsks=3,5

Curious.
-- David

On May 19, 2004, at 2:15 PM, David Creemer wrote:

> Problem fixed. Here's the solutions for those who care:
>
> - TDM400P has slots 1,2,3,4
> - "channel" in the zaptel.conf must match the slot the card is in.
>
> I have the daughter cards in slot 1 and 3.
>
> BUT here's the kicker: if the zaptel.conf configures channel 1 and 2 
> (not 3). No error is reported, and ztcfg -vv reports:
>
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>
> 2 channels configured.
>
> If zaptel.conf configures channels 1 and 3 (not 2), ztcfg-vv reports:
>
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
>
> Which is the right answer.
>
> -- David
>
> On May 19, 2004, at 1:36 PM, Rich Adamson wrote:
>
>> Looks to me like you have 1 and 3 installed, not 1 and 2. Look
>> close at your dmesg output.
>>
>> ------------------------
>>> Hi-
>>>
>>> I'm totally stumped configuring my TDM400P with one FXS and one FXO
>>> module. Before I got the FXO module, I used to have an X101P, and
>>> everything was working very well. Now * doesn't seem to recognize the
>>> FXO channel. I've searched the wiki and the list archives. Stock 
>>> Debian
>>> 3.0 stable installation. Any advice? Thanks.
>>>
>>> -- David
>>>
>>>
>>> Here's my configuration:
>>>
>>> modprobe zaptel
>>> modprobe wcfxs
>>>
>>> report no errors.
>>>
>>> box:/etc/asterisk# ztcfg -vv
>>>
>>> Zaptel Configuration
>>> ======================
>>>
>>>
>>> Channel map:
>>>
>>> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
>>> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>>>
>>> 2 channels configured.
>>>
>>> ---------------
>>>
>>> So it looks like things are OK so far. Here's the relevant portion of
>>> my zaptel.conf:
>>>
>>> defaultzone=us
>>> # load FXO X100P channel 1, kewlstart signalling
>>> # turned off, card removed
>>> #fxsks=1
>>> # load FXS TDM400P channel 1, kewlstart signalling
>>> fxoks=1
>>> # load FXO TDM400P channel 2, kewlstart signalling
>>> fxsks=2
>>>
>>>
>>> And here's what dmesg reports:
>>>
>>> Zapata Telephony Interface Registered on major 196
>>> PCI: Found IRQ 12 for device 00:09.0
>>> Freshmaker version: 63
>>> Freshmaker passed register test
>>> Module 0: Installed -- AUTO FXS
>>> Module 1: Not installed
>>> Module 2: Installed -- AUTO FXO
>>> Module 3: Not installed
>>> Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
>>> Registered tone zone 0 (United States / North America)
>>>
>>> -----------------------------------------------
>>>
>>> the relevant portions of my zapata.conf are:
>>>
>>> [channels]
>>> language=en
>>> usecallerid=yes
>>> hidecallerid=no
>>> callwaiting=yes
>>> usecallingpres=yes
>>> callwaitingcallerid=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>> busydetect=yes
>>> callprogress=yes
>>>
>>> ; interfaces for internal analog phones
>>> signalling=fxo_ks
>>> threewaycalling=yes
>>> transfer=yes
>>> group=1
>>> context=from-internal
>>> callerid="Creemer" <01>
>>> channel => 1
>>> mailbox=01
>>>
>>> ; interfaces to the external PSTN line
>>> signalling=fxs_ks
>>> context=from-pstn
>>> group=2
>>> channel => 2
>>>
>>> -----------------------------------------------
>>>
>>> starting asterisk gives:
>>> [chan_zap.so] => (Zapata Telephony w/PRI)
>>>    == Parsing '/etc/asterisk/zapata.conf': Found
>>> May 19 10:42:20 DEBUG[1024]: chan_zap.c:1077 update_conf: Updated
>>> conferencing on 1, with 0 conference users
>>>      -- Registered channel 1, FXO Kewlstart signalling
>>> May 19 10:42:20 WARNING[1024]: chan_zap.c:665 zt_open: Unable to
>>> specify channel 2: No such device
>>> May 19 10:42:20 ERROR[1024]: chan_zap.c:5340 mkintf: Unable to open
>>> channel 2: No such device
>>> here = 0, tmp->channel = 2, channel = 2
>>> May 19 10:42:20 ERROR[1024]: chan_zap.c:7376 setup_zap: Unable to
>>> register channel '2'
>>> May 19 10:42:20 WARNING[1024]: loader.c:313 ast_load_resource:
>>> chan_zap.so: load_module failed, returning -1
>>>    == Unregistered channel type 'Tor'
>>>    == Unregistered channel type 'Zap'
>>>      -- Unregistered channel 1
>>>      -- Unregistered channel 2
>>> May 19 10:42:20 WARNING[1024]: loader.c:408 load_modules: Loading
>>> module chan_zap.so failed!
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> ---------------End of Original Message-----------------
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users