[Asterisk-Users] TDM400P problems with 1 FXS, 1 FXO

[Rich Adamson]

Looks to me like you have 1 and 3 installed, not 1 and 2. Look
close at your dmesg output.

------------------------
> Hi-
> 
> I'm totally stumped configuring my TDM400P with one FXS and one FXO 
> module. Before I got the FXO module, I used to have an X101P, and 
> everything was working very well. Now * doesn't seem to recognize the 
> FXO channel. I've searched the wiki and the list archives. Stock Debian 
> 3.0 stable installation. Any advice? Thanks.
> 
> -- David
> 
> 
> Here's my configuration:
> 
> modprobe zaptel
> modprobe wcfxs
> 
> report no errors.
> 
> box:/etc/asterisk# ztcfg -vv
> 
> Zaptel Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 
> 2 channels configured.
> 
> ---------------
> 
> So it looks like things are OK so far. Here's the relevant portion of 
> my zaptel.conf:
> 
> defaultzone=us
> # load FXO X100P channel 1, kewlstart signalling
> # turned off, card removed
> #fxsks=1
> # load FXS TDM400P channel 1, kewlstart signalling
> fxoks=1
> # load FXO TDM400P channel 2, kewlstart signalling
> fxsks=2
> 
> 
> And here's what dmesg reports:
> 
> Zapata Telephony Interface Registered on major 196
> PCI: Found IRQ 12 for device 00:09.0
> Freshmaker version: 63
> Freshmaker passed register test
> Module 0: Installed -- AUTO FXS
> Module 1: Not installed
> Module 2: Installed -- AUTO FXO
> Module 3: Not installed
> Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
> Registered tone zone 0 (United States / North America)
> 
> -----------------------------------------------
> 
> the relevant portions of my zapata.conf are:
> 
> [channels]
> language=en
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> busydetect=yes
> callprogress=yes
> 
> ; interfaces for internal analog phones
> signalling=fxo_ks
> threewaycalling=yes
> transfer=yes
> group=1
> context=from-internal
> callerid="Creemer" <01>
> channel => 1
> mailbox=01
> 
> ; interfaces to the external PSTN line
> signalling=fxs_ks
> context=from-pstn
> group=2
> channel => 2
> 
> -----------------------------------------------
> 
> starting asterisk gives:
> [chan_zap.so] => (Zapata Telephony w/PRI)
>    == Parsing '/etc/asterisk/zapata.conf': Found
> May 19 10:42:20 DEBUG[1024]: chan_zap.c:1077 update_conf: Updated 
> conferencing on 1, with 0 conference users
>      -- Registered channel 1, FXO Kewlstart signalling
> May 19 10:42:20 WARNING[1024]: chan_zap.c:665 zt_open: Unable to 
> specify channel 2: No such device
> May 19 10:42:20 ERROR[1024]: chan_zap.c:5340 mkintf: Unable to open 
> channel 2: No such device
> here = 0, tmp->channel = 2, channel = 2
> May 19 10:42:20 ERROR[1024]: chan_zap.c:7376 setup_zap: Unable to 
> register channel '2'
> May 19 10:42:20 WARNING[1024]: loader.c:313 ast_load_resource: 
> chan_zap.so: load_module failed, returning -1
>    == Unregistered channel type 'Tor'
>    == Unregistered channel type 'Zap'
>      -- Unregistered channel 1
>      -- Unregistered channel 2
> May 19 10:42:20 WARNING[1024]: loader.c:408 load_modules: Loading 
> module chan_zap.so failed!
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------