[Asterisk-Users] IAXy

[Florian Overkamp]

Hi,

> -----Original Message-----
> >- Sometimes a call won't go through, dialtone stays on after 
> keypresses.
> >Strange. A powercycle of the iaxy usually helps
> 
> Are you changing which phone is plugged into the iaxy before 
> this happens?  The changing of resistance levels I have 
> noticed to cause this occasionally.

Nope, no changes in the phone connection.

By the way, what does this mean:
    -- Accepted AUTHENTICATED TBD call from <ip>

> 
> >- No support for hookflash transfers (will this be possible ??)
> >
> >  
> >
> 
> There is most definately support for flashhook transfers.  
> Hit Flash, then #, then dial the number you're' transferring 
> to.  I've done this for awhile now, and it works fine.

Can you show your IAXy provisioning config ? This doesn't do anything with
my setup.


> Make sure you're running revision 14 of the firmware.  type 
> iax2 show firmware from the cli to see which firmware you 
> have on your asterisk 
> system.    If it's not the latest, i reccomend doing a cvs update to 
> latest -HEAD .  If you're not running HEAD this is futile.  
> Also, to see which version of firmware you have on the iaxy, 
> do an iax2 debug, and watch for the iaxy's talk, it will tell 
> you what firmware revision it's running.

I did, and I can confirm the IAXy is running version 14.

Florian