[Asterisk-Users] DASS2 support

[Storer, Darren]

Hi Peter,

PC> >Has anybody got Asterisk to work with DASS2 circuits?

As Steve said there is no native support for DASS2 within *. This leaves you
with a couple of choices:

 a) Ask for a new ETSI Q.931 ISDN circuit from a new Telco (no risk to
existing PBX). This can be at a very low cost if you go to a competitive
carrier who wants your business!

 b) Obtain a protocol converter (not cheap).

If you're interested in (b), follow the link below and take your pick (but
put your cheque book on steroids first):

http://tinyurl.com/2wzh8

HTH

Darren
PS. Please be aware that if you order a new circuit in the UK you should
specify ISDN30e to ensure you receive an ETSI compliant circuit that will
work with *.
--
Comgate
Telco>Internet<Broadcast

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Steve
Underwood
Sent: 13 May 2004 13:27
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] DASS2 support


Peter Corlett wrote:

>My employer wants to use Asterisk, but the E1 circuit providing the current
>phone system is DASS2 rather than ISDN30. Converting the E1 to ISDN30 is
not
>a practical proposition at this time as it'd stop the legacy phone system
>from working.
>
>Is there any sort of hardware support for DASS2? I speculate that the E100P
>should be able to deal with the electrical side of it, but I'm unsure of
>driver support.
>
>Has anybody got Asterisk to work with DASS2 circuits?
>
>Thanks in advance.
>
>
* has no software support for DASS or DASS2

Regards,
Steve

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users