[Asterisk-Users] Help with initial setup

[Tony]

Yep both grandsteam phones are working great! I changed only the ip
addresses to match my network.
The only soft phone I've tried so far is Kphone. I have it calling both
grandstreams - but my workstation (mandrake 10 community) is fighting
with my sound card; so I can't talk - listen.
I'll try again today to get it going.
t o n y
On Thu, 2004-05-13 at 03:08, deepak at netandroid.com wrote:
> Tony
> 
> Are you able to make this configuration work with 2 sip phone on same Asterisk
> server? I am also trying to do the same using xlite softphone abailable on
> www.xten.com site. 
> Please let me know wgat you did?
> 
> Thanks
> 
> Deepak
> Quoting Tony <tony at mail.applog.com>:
> 
> > On Sun, 2004-05-09 at 18:51, matthew at burtonhosting.com wrote:
> > > Hi,
> > > 
> > > I've have followed through the help docs in trying to get an initial setup
> > > going with two phones and the asterisk server.  Firstly, all I'm trying to
> > > do is get the two phones actually talking to one another VIA asterisk..
> > > 
> > > I've added this to sip.conf:
> > > 
> > > [phone1]
> > > type=friend
> > > host=dynamic
> > > defaultip=192.168.1.106
> > > ;username=blah
> > > ;secret=blah
> > > dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
> > > mailbox=1000 ; Mailbox for message waiting indicator
> > > context=sip
> > > callerid="Me" <2124>
> > >  
> > > [phone2]
> > > type=friend
> > > ;secret=blah
> > > host=dynamic
> > > defaultip=192.168.1.107
> > > dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
> > > mailbox=1000 ; Mailbox for message waiting indicator
> > > context=sip
> > > callerid="Mini Me" <2123>
> > > 
> > > And in extensions.conf at the very end:
> > > 
> > > [sip]
> > > exten => 1,1,Dial(SIP/phone1,20,tr)
> > > exten => 2,1,Dial(SIP/phone2,20,tr)
> > > exten => 1000,1,Dial(SIP/phone1&SIP/phone2,20,tr)
> > > 
> > > These are budgetone 102's, so I've then proceeded to their admin
> > interface,
> > > and told them that the sip server is: "192.168.1.13".  For phone1, all
> > I've
> > > set is the sip id/username as "phone1" and likewise for "phone2" on phone
> > > number two.  Rebooted.. But I do not seem to be able to get them to talk
> > to
> > > asterisk.
> > > 
> > > When issuing a "sip show peers" in asterisk, it displays:
> > > 
> > > Name/username    Host                 Mask             Port     Status    
> > > phone2/phone2    192.168.1.107   (D)  255.255.255.255  5060    
> > Unmonitored
> > > phone1           (Unspecified)   (D)  255.255.255.255  0       
> > Unmonitored
> > > 
> > > And when a sip show registry is issued, nothing seems to be connected:
> > > 
> > > Host                  Username     Refresh State 
> > > 
> > > Could there be something I'm missing in order to get the very basic
> > working
> > > and then expand on that?
> > > 
> > > Thanks in advance.
> > > 
> > > Matthew
> > Matt has made a great start page -
> > http://astguiclient.sourceforge.net/scratch_install.html
> > Just change the ip's to match your own - you'll be going in minutes! 
> > t o n y
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> 
> 
> 
> 
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users