[Asterisk-Users] Callerid via PRI

[MattB]

I just created a patch to return the specific sequence number of calling
number entries so you can ignore my plea for help.

Thanks.

-- 
 Matthew Billings              |   Affordable WWW & Internet Solutions
 foreThought.net               |   for Small Business
 matt.billings at foreThought.net |   910 16th Street, #1220  (303)
228-0070 x821
 --The Future is Now!--        |   Denver, CO 80202        (303)
228-0077 fax 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of MattB
> Sent: Monday, May 10, 2004 3:03 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Callerid via PRI
> 
> When receiving multiple calling numbers via a PRI for a call setup, I
> cannot find the ability to select between either first or last.  Is
> there a way to do this currently?  If not, can anyone help me in
getting
> this to work?  Here is the dump of the PRI in intensive debugging.
> Please note that I want the first calling number, not the last.  Any
> help would be much appreciated.  Below the PRI trace is my Zapata.conf
> for reference.
> 
> < Informational frame:
> < SAPI: 00  C/R: 1 EA: 0
> <  TEI: 000        EA: 1
> < N(S): 103   0: 0
> < N(R): 103   P: 0
> < 47 bytes of data
> -- ACKing all packets from 102 to (but not including) 103
> -- Since there was nothing left, stopping T200 counter
> -- Stopping T203 counter since we got an ACK
> -- Nothing left, starting T203 counter
> < Protocol Discriminator: Q.931 (8)  len=47
> < Call Ref: len= 2 (reference 11520/0x2D00) (Originator)
> < Message type: SETUP (5)
> < Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: 3.1kHz audio (16)
> <                              Ext: 1  Trans mode/rate: 64kbps,
> circuit-mode (16)
> <                              Ext: 1  User information layer 1: u-Law
> (34)
> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
Preferred
> Dchan: 0
> <                        ChanSel: Reserved
> <                       Ext: 1  Coding: 0   Number Specified   Channel
> Type: 3
> <                       Ext: 1  Channel: 1 ]
> < Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard
(0)
> 0: 0   Location: Public network serving the remote user (4)
> <                               Ext: 1  Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> <                           Presentation: Presentation permitted, user
> number passed network screening (1) '5555551234' ]
> < Calling Number (len= 4) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
> Unknown Number Plan (0)
> <                           Presentation: Unknown (67) '' ]
> < Called Number (len=10) [ Ext: 1  TON: Subscriber Number (4)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '5590004' ]
> Sending Receiver Ready (104)
> 
> Zapata.conf
> [channels]
> context=default
> switchtype=national
> pridialplan=national
> signalling=pri_cpe
> usecallerid=yes
> usecallingpres=no
> hidecallerid=no
> ;callerid=asreceived
> threewaycalling=no
> cancallforward=no
> transfer=no
> immediate=no
> adsi=no
> echotraining=yes
> echocancel=yes
> echocancelwhenbridged=yes
> group=1
> channel=1-23
> 
> 
> --
>  Matthew Billings              |   Affordable WWW & Internet Solutions
>  foreThought.net               |   for Small Business
>  matt.billings at foreThought.net |   910 16th Street, #1220  (303)
> 228-0070 x821
>  --The Future is Now!--        |   Denver, CO 80202        (303)
> 228-0077 fax
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users