[Asterisk-Users] Transfering with Grandstream Phones

[Jeremy Jones]

I'm talking about the ht, but I assume (big assumption, I know) that the
sip stack is the same between the two.

jeremy 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Dave Cotton
> Sent: Monday, May 10, 2004 9:30 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Transfering with Grandstream Phones
> 
> On Mon, 2004-05-10 at 09:12 -0600, Jeremy Jones wrote:
> > The gs handytone 286 user manual at the gs website lists 
> call transfer/call
> > forward as not yet implemented (the firmware version listed 
> on the manual is
> > out of date, thoughg).  I sent a query to gs tech support a 
> month or two ago
> > and received this:
> > 
> > "Call waiting and Caller-ID are implemented in HT-286.  
> Call transfer is
> > implemented but not activated yet.  We expect to release a 
> firmware to
> > enable
> > Call transfer in about a week.
> > 
> > Call forward is not supported yet."
> > 
> > I haven't tried any newer firmware, though.
> 
> Are you talking about the Grandstream HT286 or the Grandstream BT101?
> 
> The original post was talking about the BTs.
> 
> In both cases I can transfer with no problems using 1.0.4.63 
> firmware on
> both units.
> 
> In the case of the BT using the Transfer button and in the case of the
> HT using the R button on the Siemens Gigaset.
> 
>  
> -- 
> Dave Cotton <dcotton at linuxautrement.com>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>