[Asterisk-Users] No outbound calls at a PRI possible
Storer, Darren
starusers at comgate.tv
Sun May 9 17:28:36 MST 2004
Hi Felix,
on some UK public switches I have seen similar bad call setup problems with
a release cause of 28 (Invalid number format) when using:
pridialplan=national
Have you tried:
pridialplan=unknown
in zapata.conf?
It seems as though the omission of the pridialplan= statement in zapata.conf
is treated by Asterisk as pridialplan=national.
We could probably give you more relevant suggestions if you would enable a
more verbose level of output and post the call setup trace results here. Try
the following command from the Asterisk CLI before making your next call:
pri debug span x
Where x = single integer digit for the PRI span that will be used to make
the outgoing call. (Eg. 1)
Please drop a note to the list (either way) with your results.
HTH
Darren
--
Comgate
Telco>Internet<Broadcast
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of ePyron Felix
Deierlein
Sent: 09 May 2004 20:32
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] No outbound calls at a PRI possible
Hello,
i guess the problem ist pridialplan from zapata.conf
with
pridialplan = local
it works :-). But I still get the error messages:
> Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0)
> Presentation: Unknown (67) '' ]
> Called Number (len= 9) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '899312' ]
What pridialplan should I use with an
E1 with Euroisdn from the German Telekom (DTAG or T-Com).
Thanks
Felix
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
> ePyron Felix Deierlein
> Sent: Sunday, May 09, 2004 6:48 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] No outbound calls at a PRI possible
>
> Hello all,
>
> the scenario:
>
> Carrier ----S2M------ * -----S2M------Siemens
> |
> |
> SIP Clients
> and many other features
>
> With much help from the list, the PRI links are without
> alarms and inbound calls are working fine (from both: Carrier
> and Siemens).
>
> But I am not able to dial wether outbound nor to the Siemens PBX.
> I allways get the message:
> == Everyone is busy at this time
>
>
> After hours of googling and reading and trying I seek help...
>
> Thank you very much.
>
> Felix Deierlein
>
>
> My extension.conf (only important parts):
> [AtInternal]
> ;exten => 402,1,Macro(stdexten,402,Zap/g2/402)
> exten => 402,1,Dial(Zap/g2/595402)
>
> [ePInternal]
> include=>system
> include=>test
> include=>AtInternal
>
> exten => 812,1,Macro(stdexten,812,${ePFfd})
> exten => 814,1,Macro(stdexten,814,${ePFjw})
> exten => 854,1,Macro(stdexten,854,${ePFch})
> exten => 5950,1,Macro(stdexten,812,${ePFfd})
> exten => _0.,1,Dial(Zap/g1/${EXTEN:1},60)
>
>
> [zapata.conf]
> [channels]
> language=en
> context=default
> switchtype=euroisdn
> ;pridialplan=national
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;pridialplan=national
> switchtype = euroisdn
> signalling = pri_cpe
> group = 1
> channel => 1-15
> channel => 17-31
>
>
> immediate=no
>
> switchtype = euroisdn
> signalling = pri_net
> group = 2
> callgroup=2
> pickupgroup=2
> channel => 32-46
>
> my zaptel.conf
> #amt (carrier)
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> #hicom (siemens)
> span=2,1,0,ccs,hdb3,crc4
> bchan=32-46
> dchan=47
> bchan=48-62
> loadzone=uk
> defaultzone=uk
> channel => 48-62
>
>
> PRI Debugging Infos:
> Call to Carrier: (Destination was 899312)
> -- Executing Dial("SIP/ePfd-b455", "Zap/1/899312|60") in new stack
> -- Making new call for cr 32774
> > Protocol Discriminator: Q.931 (8) len=40 Call Ref: len= 2
> (reference
> > 6/0x6) (Originator) Message type: SETUP (5) Bearer
> Capability (len= 3)
> > [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps,
> > circuit-mode
> (16)
> > Ext: 1 User information layer
> 1: A-Law
> > (35) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> > Exclusive
> Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified
> Channel Type:
> 3
> > Ext: 1 Channel: 1 ] Display (len= 6)
> [ 1Felix ]
> > Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user
> number not screened (0) '812' ]
> > Called Number (len= 9) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '899312' ]
> > Sending Complete (len= 0)
> -- Called 1/899312
> < Protocol Discriminator: Q.931 (8) len=14 < Call Ref: len=
> 2 (reference 32774/0x8006) (Terminator) < Message type: STATUS (125)
> < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0: 0 Location:
> Public network serving the local user (2)
> < Ext: 1 Cause: Info. element nonexist or
> not implemented
> (99), class = Protocol Error (6) ]
> < Cause data 0: 14 (20)
> < Cause data 1: 01 (1)
> < Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard
> (0) Call state:
> Call Initiated (1)
> -- Processing IE 8 (Cause)
> -- Processing IE 20 (Call State)
> < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len=
> 2 (reference 32774/0x8006) (Terminator) < Message type: CALL
> PROCEEDING (2) < Channel ID (len= 5) [ Ext: 1 IntID:
> Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified
> Channel Type:
> 3
> < Ext: 1 Channel: 1 ]
> -- Processing IE 24 (Channel Identification) < Protocol
> Discriminator: Q.931 (8) len=13 < Call Ref: len= 2
> (reference 32774/0x8006) (Terminator) < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0: 0 Location:
> Public network serving the local user (2)
> < Ext: 1 Cause: Invalid number format (28),
> class = Normal
> Event (1) ]
> < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU)
> standard (0) 0:
> 0 Location: Public network serving the local user (2)
> < Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> -- Processing IE 8 (Cause)
> -- Processing IE 30 (Progress Indicator)
> -- Channel 1, span 1 got hangup
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect
> Indication, peerstate Disconnect Request
> > Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2
> (reference
> > 6/0x6) (Originator) Message type: RELEASE (77)
> > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0: 0 Location:
> Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class
> = Normal
> > Event
> (1) ]
> -- Hungup 'Zap/1-1'
> == No one is available to answer at this time < Protocol
> Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference
> 32774/0x8006) (Terminator) < Message type: RELEASE COMPLETE
> (90) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null,
> peerstate Null NEW_HANGUP DEBUG: Destroying the call,
> ourstate Null, peerstate Null May 9 19:09:50
> WARNING[360466]: pbx.c:1836 ast_pbx_run: Timeout, but no rule
> 't' in context 'ePInternal'
>
>
> And the same for the Siemens Hicom:
>
> -- Executing Dial("SIP/ePfd-36d8", "Zap/g2/595402") in new stack
> -- Making new call for cr 32770
> > Protocol Discriminator: Q.931 (8) len=29 Call Ref: len= 2
> (reference
> > 2/0x2) (Originator) Message type: SETUP (5) Bearer
> Capability (len= 3)
> > [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps,
> > circuit-mode
> (16)
> > Ext: 1 User information layer
> 1: A-Law
> > (35) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> > Preferred
> Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified
> Channel Type:
> 3
> > Ext: 1 Channel: 1 ] Calling Number
> (len= 4) [
> > Ext: 0 TON: Unknown Number Type (0) NPI:
> Unknown Number Plan (0)
> > Presentation: Unknown (67) '' ] Called
> > Number (len= 9) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '595402' ]
> > Sending Complete (len= 0)
> -- Called g2/595402
> < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len=
> 2 (reference 32770/0x8002) (Terminator) < Message type: CALL
> PROCEEDING (2) < Channel ID (len= 5) [ Ext: 1 IntID:
> Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified
> Channel Type:
> 3
> < Ext: 1 Channel: 1 ]
> -- Processing IE 24 (Channel Identification) < Protocol
> Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference
> 32770/0x8002) (Terminator) < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0: 0 Location:
> Private network serving the remote user (5)
> < Ext: 1 Cause: Destination out of order
> (27), class =
> Normal Event (1) ]
> -- Processing IE 8 (Cause)
> -- Channel 1, span 2 got hangup
> -- Zap/32-1 is circuit-busy
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect
> Indication, peerstate Disconnect Request
> > Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2
> (reference
> > 2/0x2) (Originator) Message type: RELEASE (77)
> > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0)
> 0: 0 Location:
> Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class
> = Normal
> > Event
> (1) ]
> -- Hungup 'Zap/32-1'
> == Everyone is busy at this time
> < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2
> (reference 32770/0x8002) (Terminator) < Message type: RELEASE
> COMPLETE (90) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
> Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call,
> ourstate Null, peerstate Null
> == Everyone is busy at this time
> No such command '==' (type 'help' for help)
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list