[Asterisk-Users] MGCP problem

[Juan J. Sierralta P.]

On Wed, 2004-05-05 at 13:45, Brad White wrote:

> This is a misunderstanding of the problem.  There is not any traffic
> between the MG and MGC to look at because asterisk can't determine the
> endpoint,  re:

	Are you using CVS head ?
	Attach your mgcp.conf and show us output of mgcp reload if you defined
the MG correctly your * should be sending RSIP requests to the endpoint
after the reload.
	BTW the message you saw doesn't mean that there is no traffic between
both peers.

> > > -- Executing Dial("SIP/9999-0ccc", "MGCP/aaln2/@66.17.13.240") in
> new > stack > Apr 23 13:23:40 NOTICE[376847]: chan_mgcp.c:1457
> find_subchannel: > Gateway '66.17.13.240' (and thus its endpoint
> 'aaln2/') does not exist > > Apr 23 13:23:40 WARNING[376847]:
> chan_mgcp.c:3205 mgcp_request: Unable > to find MGCP endpoint
> 'aaln2/@66.17.13.240' > Apr 23 13:23:40 NOTICE[376847]: app_dial.c:554
> dial_exec: Unable to > create channel of type 'MGCP' 
> 
> This is a sip client trying to call a mgcp endpoint.  The very same
> mgcp endpoint gets sent dialtone from * and can also originate calls
> to either sip clients, or to * itself(the "500" demo for example).   
> I'm not a programmer, but the problem as I see it is that * does place
> brackets around the ip address when the mgcp endpoint originates a
> call and when * audits the endpoint, but * does not place brackets
> around the ip address when the mgcp endpoint is the destination of a
> call.

	It could be bug that's why we need some MGCP traffic from the start for
example the reload process and when the endpoint starts a call.
	What is the specific manufacter/model of your MG ?