[Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing

[Paul Tyreman]

Has anyone managed to get a stutter tone working on the X-Lite clients when that extension has voicemail ??





--------------------------------------------------------------------------------
From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of J Poz
Posted At: 05 May 2004 22:46
Posted To: Asterisk-Users
Conversation: [Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing
Subject: Re: [Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing


Girish and All,

I got my SIMPLE SIMPLE X-Lite to X-Lite configuration to work.

First, I want to thank "William Ray" who helped me offline. I found him by one of his postings in the http://asterisk.xvoip.com/ forum where he helped someone else with a similar issue. He gave me a working configuration for what I was trying to do and it worked.

However, I still needed to debug and find out what was wrong with my configuration since I know it can help someone else in the future (if they search the mailing list for the same or similar problem).

The main problem that PREVENTED the X-Lite softphones from communicating with eachother was I had invalid syntax in the sip.conf file for the caller-id field as follows:

Incorrect Syntax: callerid="Jay <400>"
Correct Syntax: callerid="Jay" <400>

It blows my mind why asterisk would spit out "Auto-congesting" and "is circuit-busy" errors since I don't know how they're related. 

That was the main problem that needed to get fixed for the configuration to work. Also, I then changed the DTMF mode to "rfc2833" from "inband" to get rid of "Unable to process inband DTMF on 2 frames" warnings. Everything is PEACHY now..

I hope this proves useful to others in the future. I invested over 30 hours on this problem so hopefully it can be avoided by someone else.

J..........


J Poz <jpoz0000 at yahoo.com> wrote:
Girish,

Thanks for replying and trying to work my "simple configuration". Nobody on the list has replied with any help and I still have the problem.

I've invested well over 20 hours on this problem and still don't have a solution (I have everything else within Asterisk working including IVR menus, X100 interfaces, etc). However, I am not able to get a simple Softphone to Softphone configuration to work.

Can anyone on the LIST help us

Girish Gopinath <gopinath_girish at hotmail.com> wrote:
Hello,

Replying to the mail which was posted 3 days back. I tested the 
configuration here with SJphones, and got the same error: "circuit-busy". I 
tried with sip debug turned on, and found that asterisk receives a CANCEL 
request from the user agent immediately after it receives INVITE. When i 
first saw this mail, i thought it was a simple config issue, but even after 
trying for more than 2 hours, i am not able to figure out why it is 
happening. I tried changing the sip.conf entries with the minimum required 
values, but no success. I started evaluating Asterisk a few months ago, i 
also tried with such simple configurations and did not have issues like 
this.

Here is my Asterisk version:
Asterisk CVS-02/21/04-16:21:31 built by root at localhost.localdomain on a i686 
running Linux

I am really curious if you were able to solve the problem. If so, what was 
the reason behind that weird behaviour and how did you solve it? If not, can 
anyone please tell what is going wrong?

Regards, Girish

BTW, J Poz, dont use reinvite=, it does not exist, use canreinvite= instead.

>From: J Poz 
>Reply-To: asterisk-users at lists.digium.com
>To: asterisk-users at lists.digium.com
>Subject: Re: [Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing
>Date: Sun, 2 May 2004 16:41:52 -0700 (PDT)
>
>Sorry for any confusion.........But in my latest error, instead of calling 
>my clients "jay" and "jtest", I'm calling them "400" and "410".. Everything 
>else is still the same and it's same problem.
>
>My guess is that I've set a parameter incorrectly and therefore Asterisk 
>thinks there's only one client so any calls I try to make between the two 
>fail since it thinks the other client is busy. But I do n't understand 
>enough to interpret the error message. I thought the SIP part would be the 
>easy part - I already have the FXO and FXS interfaces working.
>
>Again, thanks for anyone who can help me since I am at a loss!
>
>J Poz wrote:
>Can anyone help. I've changed the extensions.conf file as follows:
>
>extensions.conf
>[sip] ; context for X-Lite Clients
>exten =>11,1,Dial(SIP/jay,20,tr)
>exten =>22,1,Dial(SIP/jtest,20,tr)
>
>I'm still getting the Auto-congesting error (and circuit-busy). Does anyone 
>know what is causing this in such a simple configuration?
>
>
>localhost*CLI>
> -- Executing Dial("SIP/400-c3de", "SIP/410|20|tr") in new stack
> -- Called 410
>May 2 19:15:56 NOTICE[1133742896]: chan_sip.c:1021 auto_congest: 
>Auto-congesting SIP/410-a4a1
> -- SIP/410-a4a1 is circuit-busy
> == Everyone is busy at this time
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040506/0936768a/attachment.htm